Mechanical Design of a 750 kW Direct-drive Wind Turbine Generator System
750kW급 풍력터빈발전기의 기계설계
- Sohn, Y. U. (Power Center) ;
- Son, J. B. (Power Center) ;
- Park, I. S. (Power Center) ;
- Kim, Y. C. (Power Center) ;
-
Kim, K. R.
(Power Center)
;
- Chung, C. W. (Power Center) ;
- Chun, Ch. H. (Power Center) ;
- Ryu, J. Y. (UNISON Industrial Co.) ;
-
Park, J, I.
(UNISON Industrial Co.)
;
- Byun, C. J, (UNISON Industrial Co.) ;
- Kim, D. H. (UNISON Industrial Co.)
- 손영욱 (포항공대) ;
- 손정봉 (포항공대) ;
- 박인수 (포항공대) ;
- 김영찬 (포항공대) ;
-
김경렬
(포항공대)
;
- 정진화 (포항공대) ;
- 전중환 (포항공대) ;
- 류지훈 (유니슨) ;
-
박진일
(유니슨)
;
- 변철진 (유니슨) ;
- 김두훈 (유니슨)
- Published : 2004.12.01
Abstract
A prototype of 750 kW direct-drive wind turbine generator system, KBP-750D is under development in Korea. For the gearless, direct-drive prototype a synchronous generator with permanent magnets has been developed. The upwind 3-blade type machine employs variable speed and pitch control. The operating ranges of wind and rotor speed are 3 to 25 m/s and 9 to 25 rpm, respectively. The tip speed ratio of rotor blade is 7.5, designed for power coefficient 0.47, The blade pitch and torque are controlled with the predefined torque-speed curve according to the conditions of wind and public electric grid. This paper describes the outlines of primary components of KBP-750D.