한국해양공학회:학술대회논문집 (Proceedings of the Korea Committee for Ocean Resources and Engineering Conference)

한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

Turning Vane Bolt의 이종재(STS316L/IN X-750) 마찰용접에 관하여

On Dissimilar Friction Welded Joints(STS316L/IN X-750) of Turning Vane Bolt

  • 신기석 (부경대학교 산업대학원 기계설계학과) ;
  • 공유식 (부경대학교 기계공학부) ;
  • 김선진 (부경대학교 기계공학부) ;
  • 류인일 (부경대학교 기계공학부)
  • SHIN KI-SUK (Industrial Graduate School, Department of Mechanical Design Engineering, Pukyong National University) ;
  • KONG YU-SIK (School of Mechanical Engineering, Pukyong National University) ;
  • KIM SEON-JIN (School of Mechanical Engineering, Pukyong National University) ;
  • RYOO IN-IL (School of Mechanical Engineering, Pukyong National University)
  • 발행 : 2004.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Dissimilar friction welding were produced using 10mm and 11mm diameter solid bar in Inconel ally(IN X-750) to Stainless steel(STS316L) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, Virkers hardness surveys of the bond of area and HAZ and macro-structure investigations. The specimens were tested as welded, not heat-treated. The tensile strength of the friction welded steel bars was increased up to $95\%$ of the STS316L base metal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_1=220(MPa),\;P_2=260(MPa),\;t_1=4(s),\;t_2=4(s)$ when the total upset length is 7(mm).

키워드