A Study on Physical Dechlorination of Mixed Plastics using Screw Reactor

스크류반응기를 이용한 혼합플라스틱의 물리적 탈염소에 관한 연구

  • 김상국 (한국에너지기술연구원 화석에너지환경연구부) ;
  • 엄유진 (한국에너지기술연구원 화석에너지환경연구부) ;
  • 정수현 (한국에너지기술연구원 화석에너지환경연구부)
  • Published : 2005.10.14

Abstract

PVC is the thermoplastic offering excellent material properties. PVC is used in wide variety of applications, however, it causes environmental problems when it is discarded because of its high chlorine content. Since dechlorination reaction of PVC is taking place relatively low temperature compared to the pyrolysis temperature of plastics, study on the dechlorination reaction has been carried out as a pre-treatment process. Twin screw reactor which shows excellent mixing capabilities is employed. Experimental variables are first and second reactor temperature, PVC content in mixed plastics, viscosity of mixed plastics, feeding rate, rotational speed of the second reactor. Over 90% of dechlorination rate can be obtained under proper operation conditions. Chlorine gas evolved from reactor is absorbed in water and can be recovered as a hydrochloric acid. Analysis had been done on chlorine flows by taking material balance over reactor.

열가소성수지인 PVC는 우수한 물성을 가지고 있어 다양한 용도로 사용되지만 높은 염소함량으로 인하여 폐기할 때 환경문제를 야기한다. PVC로부터의 탈염소반응이 기타 플라스틱열분해 반응보다 낮은 온도에서 일어나는 점을 이용하여 전처리공정으로의 탈염소반응 연구를 수행하였다. 반응기는 교반능력이 우수한 2축 스크류반응기를 사용하였다. 실험변수는 1차반응기온도, 2차 반응기온도, 혼합플라스틱의 PVC농도, 혼합플라스틱 점도, 공급량, 2차반응기의 스크류회전수이다. 적절한 공정조건하에서 탈염율은 90%이상이었으며 탈염소공정에서 배출되는 염소가스를 물에 흡수하여 염산으로 회수가 가능하였다. 염소 물질수지를 취하여 스크류반응기 전후의 염소 흐름을 분석하였다.

Keywords