Microstructures and Hall Properties of p-type Zno Thin Films with Ampouele-tube Method of P and As

Ampoule-tube 법을 이용한 P와 As 도핑 p형 ZnO 박막의 미세구조와 Hall 특성

  • So, Soon-Jin (Knowledge*On Inc.) ;
  • Lim, Keun-Young (Wonkwang Univ. School of Electrical Electronic and Information Engineering) ;
  • Yoo, In-Sung (Wonkwang Univ. School of Electrical Electronic and Information Engineering) ;
  • Park, Choon-Bae (Wonkwang Univ. School of Electrical Electronic and Information Engineering)
  • 소순진 ((주) 나리지*온) ;
  • 임근영 (원광대학교 전기전자 및 정보공학부) ;
  • 유인성 (원광대학교 전기전자 및 정보공학부) ;
  • 박춘배 (원광대학교 전기전자 및 정보공학부)
  • Published : 2005.07.07

Abstract

To investigate the ZnO thin films which is interested in the next generation of short wavelength LEDs and Lasers, our ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $300^{\circ}C$ and 5.2 mTorr, and the purity of target is ZnO 5N. The thickness of ZnO thin films was about $1.9{\mu}m$ at SEM analysis after sputtering process. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5\times10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAs_2$. Those diffusion was perform at 500, 600, and $700^{\circ}C$ during 3hr. We find the condition of p-type ZnO whose diffusion condition is $700^{\circ}C$, 3hr. Our p-type ZnO thin film has not only very high carrier concentration of above $10^{19}/cm^3$ but also low resistivity of $5\times10^{-3}{\Omega}cm$.

Keywords