The Realization of a Single-Phase Parallel Active Power Filter to Eliminate Harmonics of Source Current Generated by Nonlinear Loads

비선형부하에 의해 발생한 전원 전류의 고조파를 제거하기 위한 단상 병렬형 Active Power Filter의 구현

  • Jang, Mok-Soon (Dept. of Electrical and Electronic Engineering, Kangwon National University) ;
  • Lee, Hu-Chan (Dept. of Electrical and Electronic Engineering, Kangwon National University) ;
  • Kim, Sang-Hoon (Dept. of Electrical and Electronic Engineering, Kangwon National University) ;
  • Park, Jong-Yeon (Dept. of Electrical and Electronic Engineering, Kangwon National University)
  • 장목순 (강원대학교 전기전자 공학과) ;
  • 이후찬 (강원대학교 전기전자 공학과) ;
  • 김상훈 (강원대학교 전기전자 공학과) ;
  • 박종연 (강원대학교 전기전자 공학과)
  • Published : 2006.07.12

Abstract

This paper presents a single-phase parallel active power filter with an analog control circuit to eliminate for harmonic source currents generated by nonlinear loads. The proposed system removes the harmonic source currents by injecting a compensation current that is 180' out of phase with the load harmonic current. The detection of the load harmonics is realized by a simple new structure, referred to the Notch Filter with GIC (Generalized Impedance Converter), which has higher Q than existing harmonic detecters and a simpler structure. The compensation current is obtained using the proposed harmonic detection circuit, DC-Link voltage, and output current of the full-bridge inverter controlled current mode PWM controller. The operation of the proposed system is verified experimentally.

Keywords