An experimental study for shear loading capacity of segmental members depending on various types of shear connector

전단연결부 형상에 따른 분절부재의 전단내하력에 대한 실험적 연구

  • 한만엽 (아주대학교 건설시스템공학과) ;
  • 강태헌 (아주대학교 건설시스템공학과) ;
  • 신재우 (아주대학교 건설시스템공학과) ;
  • 진경석 (아주대학교 건설시스템공학과) ;
  • 강상훈 (아주대학교 건설시스템공학과)
  • Published : 2006.05.11

Abstract

The numerical analysis and the experiment was performed to investigate the influences of shear connector on shear resistance capability. The numerical analysis's results should that the H/B ratio of shear key is more effective than angle of shear key against shear strength and shear behavior, and it is more desirable to use a half of the H/B ratio of shear key. The specimen was made with same condition as AASHTO recommended. There model tests were performed under various form of shear key, number, arrangement reinforcement and condition using epoxy. As a result of the experiment, there is little difference(or there is no difference) between the case of using epoxy on shear connector and the unused case.

Keywords