Analysis on the Sliding Load for Hign-Tension Bolt Joint of the H-Beam in Pure Bending

Pure Bending이 작용하는 H-Beam의 도입축력 변화에 따른 고장력볼트 연결부 거동 분석

  • Published : 2006.05.26

Abstract

Currently the bolt joint defect occurs from the steel bridge which is in the process of using but that investigation about each kind defect is lacking state. Research to see consequently the high strength bolt joint sliding conduct bring the model it used a structural analysis program LUSAS numerical analysis execution and a plan for Steel Box Girder Bridge copying full-size H-Beam and plan pretensioned bolt force 100%. 75%, 50% and 25% pretensioned force it acted in standard. And a hold an examination, against the sliding loads which it follows in the pretensioned force it will analysis.

고장력볼트에 의한 부재연결 방법 중 가장 대표적인 마찰이음은 사용성 측면에서의 한계상태는 미끄러짐이 발생한 상태라고 할 수 있다. 따라서, 한계상태를 고려한 설계를 위해서는 미끄러짐 내력을 정확히 파악할 필요가 있다. 현재 공용중인 강교에서 발생하는 볼트 연결부의 결함 중 볼트 도입축력 부족의 발생빈도가 가장 크지만 도입축력부족에 따른 결함의 연구는 미비한 상태이다. 따라서 본 연구에서는 고장력 볼트 연결부의 미끄러짐 거동을 파악할 수 있는 모델 제시하기 위하여 범용 유한요소 구조해석 프로그램인 LUSAS를 이용하여 수치해석을 실시하였고, 오직 축력만이 작용하는 표준 시험체와 교량보다 비교적 구조계가 간단한 단순경간 강상형교를 모사한 full-size의 H-Beam시험편을 설계하여 설계볼트 도입축력 100%인 시험편의 도입축력을 기준으로 75%, 50%, 25%의 축력을 도입하여 정적 시험을 실시하여 마찰 문제로 인한 고장력 볼트 연결부의 내력을 수치해석한 결과와 비교 분석하고자 한다.

Keywords