Design and fabrication of a Triple Band Internal Antenna for Handset

휴대용 내장형 트리플(DCS, PCS, UPC5) 안테나 설계 및 제작

  • Park, Seong-Il (Dept. of Information & Communication Eng. Dongshin Univ.) ;
  • Ko, Young-Hyuk (Dept. of Information & Communication Eng. Dongshin Univ.)
  • 박성일 (동신대학교 정보통신공학과) ;
  • 고영혁 (동신대학교 정보통신공학과)
  • Published : 2008.05.30

Abstract

In this paper, triple band mobile chip antenna for DCS($1.71{\sim}1.88GHz$) / PCS($1.75{\sim}1.87GHz$) / UPCS($1.85{\sim}1.99GHz$) on PCB Layout is fabricated. As designed and fabricated antenna is loaded PCB layout, that plate a both side at two independence patterns(upper & lower) to reduce the size and a capacitor for DCS, PCS, UPCS band is proposed. The antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is the defect of chip antenna is improved. Bandwidth of fabricated antenna to VSWR less than 2 is satisfied and all bandwith is acquired 15.1 % at $1.71GHz{\sim}1.99GHz$.

본 논문에서는 이동통신용 단말기 PCB Layout 위에 내장형 Chip 안테나를 직접 설계하여 DCS($1.71{\sim}1.88GHz$) 대역, PCS($1.75{\sim}1.87GHz$) 대역 및 UPCS($1.85{\sim}l.99GHz$) 대역에서 공통으로 사용할 수 있는 이동통신용 트리플밴드 Chip 안테나를 설계하였다. 설계 제작된 안테나는 PCB 기판위에 탑재되는 안테나로서 안테나의 양측면에 씌워진 상부 방사패치와 하부 방사패치로 구성되어 있으며, 상하부 방사패치의 용량과 길이를 조절함으로서 DCS, PCS, UPCS대역에서 공동으로 사용할 수 있는 트리플 안테나를 제안했다. 안테나의 크기는 $19mm{\times}4mm{\times}1.6mm$으로 설계하여 매우 소형화시켰으며, Chip 안테나의 단점인 좁은 대역폭을 크게 개선시켰다. 설계한 안테나의 대역폭은 정재파비2 이하를 기준으로 DCS, PCS, UPCS 대역을 모두 충족하였으며, 전체 대역폭은 $1.71GHz{\sim}1.99GHz$의 15.1%의 주파수 대역폭을 얻었다.

Keywords