Suggestion of Segregation Evaluation Method based on Evaluation Index for Segregation(EIS)

재료분리 평가정수(EIS)에 의한 재료분리 평가법의 제안

  • Published : 2008.11.07

Abstract

Currently more high flow and high performance concrete is used for construction of buildings in the world. However, when high flow and high performance concrete put high performance water reducing agent in quantity to improve flow, it has a negative effect on concrete structures since segregation arises from it though flow will be improved. There are naked-eye observation, coarse aggregate washing test, L Flow test for permeation among reinforcing rods and measurement of viscosity to judge concrete segregation resistance. However, it is difficult to apply them to practical affairs since they are very complicated and troublesome. Therefore, the study analyzed EIS dividing slump flow value into slump value, how to valuate concrete segregation resistance more easily, on the basis of the existing reference materials to propose EIS. As the results, in the event of high flow concrete, it is desirable that EIS value is prescribed to be less than 2.5 at the time of managing segregation. Also, at the time of prescribing EIS with performance, it is judged that it is desirable to manage segregation as less than 2.2 (Grade 1), 2.2$\sim$2.4 (Grade 2) and more than 2.6 (Grade 3).

국내 외에서는 건축물들이 고유동 및 고성능 콘크리트의 사용량이 증가되고 있는 추세이다. 그러나 고유동 고성능 콘크리트는 유동성 향상을 위해 고성능 감수제를 다량으로 사용할 경우 유동성은 향상되었을 망정 재료분리가 발생하여 콘크리트 구조물에 악영향을 미치게 된다. 이러한 콘크리트의 재료분리 저항성을 판정하기 위한 방법으로 육안관찰, 굵은골재 씻기 시험, L Flow 철근사이의 통과성 시험, 점성측정에 의한 방법 등이 있는데, 이 같은 방법들은 매우 복잡하고 번거로우므로 실무적용에는 어려움이 있다. 그러므로 콘크리트의 재료분리 저항성을 보다 손쉬운 방법으로 평가하기 위한 방법으로 슬럼프플로우치를 슬럼프치로 나눈 EIS를 제안하기 위하여 기존 참고자료를 바탕으로 분석하였다. 그 결과 고유동 콘크리트의 경우 시방적 규정으로 재료분리 여부를 관리할 경우에는 EIS 값을 2.5 이하로 규정하면 타당할 것으로 사료되고, 성능적으로 EIS를 규정할 경우에는 1등급 2,2 이하, 2등급 2.2$\sim$2.4, 3등급 2.4$\sim$2.6, 2.6 이상은 재료분리로 관리하면 합리적일 것으로 사료된다.

Keywords