Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference (한국전기전자재료학회:학술대회논문집)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

A Study on the Design and Fabrication for Partial Discharge Measurement in 22.9kV XLPE Power Cable using Planar Patch Sensor

22.9 kV XLPE 전력케이블에서 부분방전 측정을 위한 Planar Patch Sensor 설계 및 제작 연구

  • Lim, Kwang-Jin (Dept. of Electronical Material Eng. Wonkwang Univ.) ;
  • Yang, Sang-Hyun (Dept. of Electronical Material Eng. Wonkwang Univ.) ;
  • Kyawsoe, Lwin (Dept. of Electronical Material Eng. Wonkwang Univ.) ;
  • Park, Noh-Joon (Dept. of Electrical Electronic and Information Eng. Wonkwang Univ.) ;
  • Park, Dae-Hee (Dept. of Electrical Electronic and Information Eng. Wonkwang Univ.)
  • 임광진 (원광대학교 대학원 전자재료공학과) ;
  • 양상현 (원광대학교 대학원 전자재료공학과) ;
  • ;
  • 박노준 (원광대학교 전기전자및정보공학부) ;
  • 박대희 (원광대학교 전기전자및정보공학부)
  • Published : 2008.06.19
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this paper is to effectively detect partial discharges in XLPE power cables. In this field, we have been usually applied several sensors for such partial discharges. This study used a type of beyond compare antenna based on the influence of background noises. Also, we designed a new structure that is able to easily apply in the adhesion of planar patch types for XLPE power cables in measurement sensitiveness elevation. A high frequency simulation tool (CST-MWS) was applied to the antenna used in this study, and it was used to evaluate certain characteristics. We fabricated an antenna using the simulation data obtained from a specific test. After checking the sensitivity of this Planar Patch Sensor in the Lab, it was tested in an actual site. This paper analyzed the data as a part of time and frequency domain using an oscilloscope and spectrum analyzer, respectively.

Keywords