A study on the drawing of spline shaped section with non-rotary symmetry

비회전 대칭 단면 형상의 스플라인 인발 공정에 관한 연구

  • Choi, B.H. ;
  • Han, S.S. ;
  • Han, C.H.
  • 최병현 (금오공과대학교 대학원 생산기계공학과) ;
  • 한수식 (금오공과대학교 기계공학부) ;
  • 한철호 (금오공과대학교 기계공학부)
  • Published : 2008.05.08

Abstract

During the drawing of reentrant section like a spline, the unfilled in the corner of dies or the bended product emerges from the large reduction of area, the complex shaped sections and other nonuniform properties in material and lubrication conditions. In this study, the drawing of the spline section with the non-rotary symmetry from a circular aluminum billet has been analyzed by using commercial code DEFORM-3D. A new die construction method preventing the spline from the drawback of bending and the unfilled defect has been suggested and verified through the analysis using centroid shift method and the hybrid construction between converged and diverged profile.