The design and construction with the JES method used steel elements for under pass in korea and the practical use of the JES method

강재 엘리먼트를 이용한 기계식 UNDER PASS 공법(JES 공법)의 국내 적용 사례 및 활용 방안 연구

  • Published : 2009.05.21

Abstract

Recently, the expansion of roads are necessary because the population and vehicles have rapidly increased, but those are restricted because of the limited site. JES(Jointed Element Structure) method is the method of the new cross-structure, which is element-traction method which draws and excavates elements under the existing structure with high accuracy within a short time. Also JES(Jointed Element Structure) method has a facility of the economical execution, a small effect on the train-service during construction period and no limit of the crossing length under the trade In this study, the tractive force and settlement are compared with the upper element, side wall element and the lower element respectively in the section which the JES method is applied In the case of element located at left side wall, the tractive force measured by a guage is double or more than the tractive force calculated by a formula. It is expected that many boulder contented in the ground contrary to the site investigation data cause high tractive force. For comparison of the settlement, the settlement as excavating the upper element is the largest in all steps. It is expected that this is the same as the cause of high tractive force. Also in this study, the practical use of the JES method when some under pass structures are extended in the future is studied.

최근 도시로의 인구 집중과 차량 증가로 인하여 보도 및 차도의 확장이 불가피한 반면에 이는 한정된 용지로 인해 많은 제약을 받고 있는 실정이다 이에 대해 JES 공법은 기존 도로나 철도 등의 교통시설 하부를 횡단하면서 이들의 운행에 대해 제약을 최소화 할 수 있는 공법이다. 본문에서는 국내에서 최초로 JES 공법이 적용된 구간에서의 상부, 측벽, 하부 Element에서의 견인력과 침하량을 각각 비교하였다. 추진력을 비교한 결과, 좌측벽 Element 의 경우 실제 측정된 추진력이 구조계산에 의해 얻은 추진력의 2배 정도 큰 값을 보였다. 이는 사전 지반조사와는 달리 지반에 다량의 전석이 함유되어 있어서 시공 중 과도한 추진력이 발생한 것으로 판단된다. 또한 침하량을 검토한 결과, 상부 Element에서 가장 큰 값을 보였으며, 이 역사 지반에 다량의 전석이 포함되어 있어 굴착 시 공동 형성에 인한 결과라고 판단된다. 또한 본문에서는 향후 본 공법을 이용한 여려 가지 활용 방안에 대해서도 연구해 보았다.

Keywords