Proceedings of the SAREK Conference (대한설비공학회:학술대회논문집)
- 2009.06a
- /
- Pages.1361-1366
- /
- 2009
A Numerical Analysis on Flow Distribution in the Fume Collector for Plasma Cutting Machine
플라즈마 절단기용 집진기의 내부유동 분포에 관한 수치해석
-
Yi, Chung-Seub
(2nd Stage BK21(AMAEEP), Gyeongsang National University)
;
-
Suh, Jeong-Se
(School of Mechanical & Aerospace Engineering, Gyeongsang National University)
;
- Yun, Kang-Ro (Samwon Tech Co.,LTD) ;
- Park, Young-Ho (SEM Co.,LTD)
- Published : 2009.06.25
Abstract
This study is to see the internal flow for the plasma cutting fume collector. Plasma cutters are widely used in the canning industry and Fume cause the device because it will affect the performance of the design of dust collector. Therefore, to determine the distribution of the internal flow using CFD and Solver was used for calculated with commercial CFD code STAR-CCM+. The results show that design of chamber was incorrect after passed the filter for exhaust to the fan. And the location of the duct to the influx of dust collector and the design was incorrect. In addition, an array of filter was also inappropriate. As a result, present fume collector need to improvement.