A study on the mechanical properties of reinforced Nylon66 for glass fiber type and its orientation

나일론66에서 유리섬유의 종류 및 애향에 따른 기계적 물성 연구

  • 유종범 (서울산업대학교 대학원 정밀기계공학과, 로디아 폴리아마이드 주식회사) ;
  • 류민영 (서울산업대학교 금형설계학과)
  • Published : 2009.05.07

Abstract

Glass fiber reinforced nylon has been used in many plastic industries. Mechanical properties of reinforced plastics depend upon types of glass fiber as well as loading of glass fiber. Tensile properties of glass fiber reinforced nylon66 have been studied for different glass fiber types and sizes. Types of glass fibers were circular and flat, and diameters were 7, 10, and 13 micrometers. Orientations of glass fibers in the matrix of nylon66 have been analyzed through X-ray CT. Tensile specimens were prepared by cutting out of square plates of $100{\times}100{\times}3mm$ with different angles such as 0, 45, and $90^{\circ}$ to the flow direction. As the loading of glass fiber increases to 45 wt% tensile strength increases up 2.5 times compare with neat nylon66. Anisotropic tensile strength has been observed and minimum tensile strength was measured in the specimen cut from perpendicular to the flow direction.

Keywords