A Study of The Etched ZnO Thin Film Surface using inductively coupled plasma system

유도결합 플라즈마를 이용하여 식각된 ZnO 박막 표면연구

  • Published : 2010.06.16

Abstract

The surface reaction characteristics of Zinc Oxide (ZnO) in $Cl_2/BCl_3$/Ar gas ratio using inductively coupled plasma system were investigated. It was found that ZnO etch rate shows a non-monotonic behavior with increasing both Ar fraction in $Cl_2/BCl_3$ plasma, RF power, and gas pressure. The maximum ZnO etch rate of 53 nm/min was obtained for $Cl_2$(3 sccm)/$BCl_3$(16 sccm) /Ar(4 sccm) gas mixture. The chemical state of etched surfaces was investigated with X-ray diffraction (XRD) and the etched surface was investigated to the rms by atomic force microscopy (AFM). From these data, the suggestions on the ZnO etch mechanism were made by secondary ion mass spectrometery (SIMS).

Keywords