Sectional Force and Design Improvement of Abutment Wing based on Plate Analysis

판해석을 통한 교대날개벽 단면력 산정 및 설계 개선에 관한 연구

  • Published : 2010.05.06

Abstract

Current Bridge Specification for Highway Bridges adopts a simplified method to determine sectional forces of abutment wing by diving its area into four sections. This simplified method was developed when numerical analysis was not mature and computer resources were expensive. It has been criticized that the simplified method produces conservative results. This study evaluates the problem of current design practice to improve the design guideline for abutment wing.

국내 도로교설계기준에서는 날개벽 길이가 8m 미만인 경우에 대해서 날개벽을 4개 구역으로 나누고 캔틸레버 구조로 간편하게 수계산하여 단면력을 산정하도록 하는 간편법을 제시하고 있다. 이러한 간편법은 수계산에 의존하던 때에 만들어진 규정으로 과도한 안전율을 고려하게 되어 경제성 면에서도 불리한 설계가 이루어지고 있다. 따라서 본 연구에서는 불합리한 교대 날개벽 관련 도로교설계기준을 개선하기 위해서, 날개벽을 2변 고정 판구조로 해석하고 시방서 단면력과 비교검토를 실시하여 현시방서의 문제점을 정량화하고 개선책을 제시하였다.

Keywords