ATP시스템의 안전제동거리에 대한 연구

A Study on the Safety Braking Distance in ATP System

  • 김민규 (서울메트로, 신호처) ;
  • 김민석 (서울과학기술대학교, 철도전문대학원, 철도전기신호공학과) ;
  • 김종수 (서울메트로, 신호처) ;
  • 윤유범 (서울메트로, 신호처) ;
  • 이종우 (서울과학기술대학교, 철도전문대학원, 철도전기신호공학과)
  • 발행 : 2011.05.26

초록

ATP(Automatic Train Protection) system in railroad signalling system is on-board signalling system which is controlled by train control information such as location and speed of trains. Safety is ensured by transmitting the train control information between on-board and wayside device in the ATP system. When an engineer disregards the speed limit on a tachometer, the train is automatically stopped by the on-board device. Recently, the studies of increasing speed of the train have been developed. Eurobalise in ERTMS/ETCS system is used in case that speed of trains is up to 500[km/h]. A study of safety braking distance is needed by increasing the speed of train in the ATP system. Train data and track data are required to calculate the safety braking distance. The train data includes formations of trains, length of trains, service brake and emergency brake etc. Also, the track data includes slope of track, curve of track, length of track, speed limit etc. In this paper, the speed profile is computed by analyzing the train and track data in the ATP system. It is demonstrated by applying to subway line 2 in Seoulmetro through the on-site test.

키워드