Analysis of Dual-mode Resonator with Short-Stub

단락형 스터브에 의한 이중 모드 공진기의 해석

  • Published : 2013.05.22

Abstract

In this paper, electrical lengths and impedances of a dual-mode resonator are calculated by using the transfer function of a dual-mode resonator by realizing the short-stub. The electrical length of transmission-line for a resonator is function of the frequency and the electrical length of stub is defined by the frequency and impedances of line and stub. Also, the inverter value of a bandpass filter using the dual-mode resonator is calculated. The effect of stub's impedance for inverter is very small. And, as the impedance of line is decreasing, the inverter value is increasing and as the bandwidth is increasing, the inverter value is increasing.

본 논문에서는 단락형 스터브에 의해 구현되는 이중 모드 공진기의 전달 함수를 수식적으로 해석하여 임의의 공진 주파수를 만족하는 이중 모드 공진기의 전송 선로와 스터브의 전기적 길이 및 임피던스를 계산하였다. 계산된 결과에 의하면 전송 선로의 전기적 길이는 공진 주파수에 의해 결정되며, 스터브의 전기적 길이는 공진 주파수 및 선로와 스터브의 임피던스에 의해 결정된다. 또한, 이중 모드 공진기를 이용하여 필터를 설계하기 위해 필터의 리플 값에 따른 인버터의 크기를 계산하였다. 계산된 결과에 의해 스터브의 임피던스에 따른 인버터의 변화는 거의 없으며 전송 선로의 임피던스가 작을수록 인버터의 크기는 증가하고 필터의 대역폭이 클수록 인버터의 크기가 증가함을 확인하였다.

Keywords