Hydration Properties of Cement Matrix using Surface Treatment Blast Furnace Slag by Arc Discharge

아크방전에 의해 표면개질 된 고로슬래그를 사용한 시멘트 경화체의 수화 특성

  • 김선아 (목원대학교 건축공학과) ;
  • 김현성 (목원대학교 건축공학과) ;
  • 박선규 (목원대학교 건축공학과)
  • Published : 2018.05.16

Abstract

A glassy thin film was formed on the surface of the blast furnace slag. When blast furnace slag is used as an admixture of concrete, addition of alkali activators were required. However, alkali activators are not only dangerous as chemical products, but they are also difficult to use as expensive materials. Therefore, it is necessary to study the way of removal of the glassy thin film of blast furnace slag without the risk and cost increase. In this study, to solve this problem, experiment was carried out to improve the hydration reactivity by treatment the surface of blast furnace slag using arc discharge. Experimental results show that when the surface of the blast furnace slag was tratmented by arc discharge, the glassy thin film was destroyed. And the hydration reactivity was improved, the compressive strength was increased.

Keywords