Pharmaceutical study on the Compressed Tablets. Hardness, Friability, Disintegration time and Coefficient of Variance of Compressed tablets

정제류(錠劑類)의 제제학적(製劑學的) 연구(硏究) -경도(硬度), 마손도(磨損度), 붕해시간(崩解時間) 및 변동계수(變動係數)에 대(對)하여

Pharmaceutical Study on the Compressed tablets. Hardness, Friability, Disintegration time and Coefficient of Variance of Compressed tablets. Soo Uck Kim, Sung Hoon seo and Hyun Woo Lee (Department of Pharmaceutics, College of Pharmacy, Kyung Hee University) In order to know Hardness, Friability, Disintegration time and Coefficient of variance of the pharmaceutical tablets the 135 tablets sampled from market were tested in the paper. The samples tested in this paper were as follows: Antipyretics and Analgetics 41 Stomach and Digestives 22 Antituberculars 19 Vitamins 12 Sulfa drugs 9 Others (Antihistaminics etc) 32 Total 135 The results of the investigation are shown in table 1-8, Fig 1-Fig 6. Mean values of Hardness, Friability, Disintegration time and Coefficient of variance in each pharmaceutical preparation are as follows. Antipyretics and Analgetics : Hardness(kg) = 5.83 Antipyretics and Analgetics : Friabil.(%) = 0.82 Antipyretics and Analgetics : Disint.t.(min) = 5.28' Antipyretics and Analgetics : Coeff. of V.(%) = 2.90 Stomach and Digestives : Hardness(kg) = 4.11 Stomach and Digestives : Friabil.(%) = 0.71 Stomach and Digestives : Disint.t.(min) = 3.43' Stomach and Digestives : Coeff. of V.(%) = 2.76 Antituberculars : Hardness(kg) = 4.78 Antituberculars : Friabil.(%) = 0.52 Antituberculars : Disint.t.(min) = 4.32' Antituberculars : Coeff. of V.(%) = 2.99 Vitamins : Hardness(kg) = 1.60 Vitamins : Friabil.(%) = 0.43 Vitamins : Disint.t.(min) = 4.10' Vitamins : Coeff. of V.(%) = 3.19 Sulfa drugs : Hardness(kg) = 4.77 Sulfa drugs : Friabil.(%) = 0.37 Sulfa drugs : Disint.t.(min) = 3.10' Sulfa drugs : Coeff. of V.(%) = 2.09 Others : Hardness(kg) = 2.40 Others : Friabil.(%) = 0.66 Others : Disint.t.(min) = 2.19' Others : Coeff. of V.(%) = 3.10 The following summeries might be shown; 1. Ranges of Hardness, Friability, Disintegration time and Coefficient of variance are respectively 1.6 to 5.38 kg, 0.37 to 0.82%, 2 minut 19 second to 5 minut 28 second and 2.09 to 3.10%. 2. According to the results, it could be indicated that higher Hardness shows lower Friability. 3. Against the general conception between Hardness and Disintegration time, higher Hardness shows lower Disintegration time. 4. It seems that higher mean weight shows lowcr Coefficient variance.