A Study on Properties of Mortar added with Admixtures

-혼화재(混和材)를 사용(使用)한 Mortar의 성질(性質)에 관(關)한 연구(硏究)-

  • Kang, Sin Up (Dept. of Agr. Engineering, College of Agriculture) ;
  • Kim, Seong Wan (Dept. of Agr. Engineering, College of Agriculture) ;
  • Kang, Yea Mook (Dept. of Agr. Engineering, College of Agriculture)
  • Published : 1975.05.31

Abstract

This research was attempted as one of a study for investigating optimum contents of fly ash and briquette ash when they were used as admixtures. In mix designs of mortar, fly ash and briquette ash to cement, each of them, was mixed with 0, 5, 10, 15, 20, 25, 30 percent by weight of cement. They were tested for compressive strength, tension strength and bending strength, and these results were summarized as follows; 1. The compressive strength of mortar to add fly ash showed the maximum value at 25 percent. tension strength, 20 percent, bending strength, 15 percent. 2. In case of using briquette ash, compressive strength showed maximum strength at 15 percent. tension strength, 20 percent, bending strength, 20 percent. 3. To add fly ash showed in general more additive effect than to add briquette ash. 4. It was not only to excess standard strength but may be to develop as admixture when briquette ash was used around 20 percent.

Keywords