Study on the Improvement of Atomization of Droplet for Gun-type Nozzle

Gun-type Nozzle의 분무입자(噴霧粒子) 미립화(微粒化)에 관(關)한 연구(硏究)

In order to improve atomization of droplet of sprayers, gun-type nozzle equipped with swirl screw which could increase tangential velocity had been used in this study. The results obtained were as follow: The larger diameter of atomized droplet was, the longer it reached. Tile atomizing phenomenon while using swirl screw in the nozzle was more efficient. There was little difference of travelling distance in the both nozzles when the small diameter of disk hole was used, but thetravlling distance of the nozzle with swirl screw was evidently getting shorter with the increase of the hole diameter compared to that of the nozzle without swirl sorew. The size of sprayed particles was getting smaller owing to the phenomenon of air movement the one to two meters travelling distance of droplet from maximum travelling point.

Gun-type nozzle에 있어서 입자(粒子)의 미립화(微粒化)를 개선(改善)코저 절선속도(切線速度)를 증가(增加)하는 방법(方法)의 일환(一環)으로 Screw 중자(中子)를 제작(製作) 장치(裝置)한 Nozzle로 실내(室內)에서 분무실험(噴霧實驗)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 분무입자(噴霧粒子)의 직경(直徑)이 클수록 분무도달거리(噴霧到達距離)는 컸으며 Screw중자(中子)를 장치(裝置)하였을 때가 장치(裝置)하지 않았을 때에 비(比)하여 분무입자(噴霧粒子)의 미립화(微粒化)는 현저히 양호(良好)하였고 분무도달거리(噴霧到達距離)는 분구(噴口)가 소구경시(小口徑時)에는 거의 차이(差異)가 없었으나 분구(噴口)가 증대(增大)함에 따라서 현저히 짧아졌다. 최고(最高) 도달거리(到達距離) 지점(地點)부터 1~2m의 분무도달거리(噴霧到達距離)에 있어서는 기류부유이동(氣流浮遊移動)의 현상(現象)으로 분무입자(噴霧粒子)가 작아졌다.