The Effect of Additions and Sintering Temperature on Magnetic Properties of Ni-Zn Ferrite

Ni-Zn Ferrite의 자기특성에 미치는 소결온도와 첨가제의 영향

  • 이병하 (한양대학교 무기재료공학과)
  • Published : 1981.02.01

Abstract

In this study, the effect of additions on magnetic properties in the system of [$Ni_{0.32}Zn_{0.68}$] 1-x Mx $Fe_2O_4$ have been investigated. The additions, Co or Mg or Cu, was added in turn in place of M, and its composition was varied from 0.1 mo1% to 0.5 mo1%. The materials were blended by hot petroleum drying method, and sintered with the rate of 30$0^{\circ}C$/h in the air. The sintering temperatures were varied from 110$0^{\circ}C$ to 130$0^{\circ}C$, with the intervals of 5$0^{\circ}C$, and matured for 3hrs. The results are: 1) The permeability decreased when the addition, MgO or CoO, was added, and it increased when CuO was added. 2) Resistivity had the lowest Value when CuO was added.

Keywords

References

  1. J. Am. Ceram. Soc. v.41 Soft Ferrite A Rerriew W.R. Buessen(et al.)
  2. J. Am. Ceram. Soc. v.53 no.9 Ni-Zn Ferritte Effect of Composition on the Magnetic Properties of a Nickel-Zinc-(Cobalt) Ferrite F.G. Brockman;K.E. Matteson
  3. J. Applied Physics v.32 no.3 Preparation and Properties of Low-Loss Ferrite Aaron P. Grelfer;Yoshimao Nakada
  4. 전기공학 Hand Book 전기공학회 학원사
  5. J. Am. Cer. Soc. v.41 no.11 Ferrites Ernst Albers-Schoenberg
  6. J. Chem. Physics v.24 no.2 High-Resistivity Nickel-Ferrites-the effect of minor Additions of Manganese or Cobalt L. G. Van Uitert
  7. Powder met. Int. v.8 no.2 Hot Kerosene Drying, A Techinque 60 prepare Reactive, Homogeneous Ceramic powders from salt solution P. Reynen;H. Bastius
  8. Philips Technical library Ferrites J. Smit;H.P.J. Wijn
  9. 요업학회지 v.14 no.3 다성분계 산화물의 요업재료 제조를 위한 석유증발 건조방법 변수일
  10. Materials for Magnetic Functions F.N. Bradley
  11. J. Chem. Phys. v.23 no.10 D.C. Resistivity in the Nickel and Nickel Zine Ferrite system L.G. Van Uitert