산업기술연구 (Journal of Industrial Technology)

  • 제5권
  • /
  • Pages.65-71
  • /
  • 1985
  • /
  • 1229-9588(pISSN)
  • /
  • 1598-1371(eISSN)
강원대학교 산업기술연구소 (Kangwon National University, Institute of Industrial Technology)
권호 표지

기준(基準)의 변경(變更)에 따른 신치수(新値數) 및 공차계산(公差計算) -대화형식(對話形式)의 컴퓨터 프로그램개발-

The Calculation of New Dimension & Tolerance due to Change of Datum of Dimension -Development of Interactive Computer Program-

  • 현창훈 (강원대학교 공과대학 기계공학과) ;
  • 김성준 (강원대학교 공과대학 기계공학과)
  • Hyun, Chang-Heon (Dep't of Mechanical Engineering, Kanweon National University) ;
  • Kim, Sung Joon (Dep't of Mechanical Engineering, Kanweon National University)
  • 발행 : 1985.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In case that the datums chosen for dimension on engineering drawings are unsuitable for manufacturing and inspecting and inspection purposes and it is necessary to redimension the design from new datum. L. E. Farmer presented a theory for performing this change of datum, discussed a procedure for allocating tolerances to new dimensions and presented the procedure of change of datum as part of a computer aided design system. This paper deals with the development of the interactive computer program which is insufficiently presented without all coding list of program by L. E. Farmer.

키워드