냉각수(冷却水) 용량(容量)이 소형(小型) 디젤기관(機關)의 성능(性能)에 미치는 영향(影響)

Effect of Cooling Water Capacity on the Engine Performance for Small Diesel Engine

동력경운기(動力耕耘機) 탑재용(塔載用) 6kW 수냉식(水冷式) 디젤기관(機關)의 성능향상(性能向上)을 도모(圖謀)하기 위(爲)하여 현존(現存)의 냉각장치(冷却裝置)는 그대로 이용(利用)하고 냉각수(冷却水) 용량(容量)만을 2700cc에서 2800cc, 2900cc, 3000cc, 3100cc 로 4수준(水準)으로 변화(變化)시키면서 기관(機關)의 출력(出力), 연료소비율(燃料消費率), Torque, 냉각수(冷却水) 및 윤활유(潤滑油)의 온도(溫度)와 기관(機關)의 마찰손실(摩擦損失)을 D.C. dynamometer를 이용(利用)하여 측정(測定)한 결과(結果)는 다음과 같은 결론(結論)을 얻었다. 1. 공시기관(供試機關)의 출력성능(出力性能)은 한국공업표준규격범위(韓國工業標準規格範圍)에는 들었으나 정격표시마력(定格表示馬力)이 실험결과(實驗結果)보다 약(約) 10% 정도(程度) 낮게 표기(表記)되어 있으며 연료소비율(燃料消費率)은 297.78g/kW-h 로 약간(若干) 높은 수준(水準)이었으며 냉각수(冷却水) 온도(溫度)는 $101^{\circ}C$로 SAE기준(基準)인 $88^{\circ}C$보다는 $13^{\circ}C$ 정도(程度)가 높았다. 2. 공시기(供試機)의 마찰손실(摩擦損失)은 정격상용회전(定格常用回轉)인 2200rpm에서 3.65kW 이었으며 기보고(旣報告)된 측정치(測定値)보다 약간(若干) 높은 범위(範圍)이었다. 3. 냉각수(冷却水) 용량(容量)을 2700cc에서 3100cc로 14.8% 증가(增加)시켰을 때 출력(出力)은 6.7kW에서 7.13kW로 0.43kW의 6.3%가 증가(增加)하였다. Torque도 냉각수(冷却水) 용량(容量) 2700cc일 때 28.85N.m에서 3100cc일 때 30.706N.m로 6.39%가 증가(增加)하는 경향(傾向)을 보였다. 4. 냉각수(冷却水) 용량(容量) 2700cc에서 3100cc로 증가(增加)시켰을 때 연료소비율(燃料消費率)은 310.85g/kW-h에서 304.14g/kW-h로 6.69g/kW-h가 감소(減少)하였으며 30분간(分間) 전하중운전시(全荷重運轉時) 냉각수(冷却水)의 온도(溫度)는 냉각수(冷却水) 용량(容量)이 2700cc에서 $101^{\circ}C$였고 냉각수(冷却水) 용량(容量)이 3100cc에서 $88^{\circ}C$로 $13^{\circ}C$가 감소하여 3100cc일 때는 SAE 표준(標準)과 같았고 윤활유(潤滑油) 온도(溫度)는 냉각수(冷却水) 용량(容量)이 2700cc일 때, $76.7^{\circ}C$였으며 냉각수(冷却水) 용량(容量)이 3100cc에서는 $70.4^{\circ}C$로 $6.4^{\circ}C$가 감소하였다. 5. 기계효율(機械效率)은 냉각수(冷却水) 용량(容量)이 2700cc에서 70.08%였고 냉각수(冷却水) 용량(容量)이 3100cc일 때는 71.08%로 0.95%가 증가(增加)하였다.

This study was attempted to improve the thermal efficiency of 6 kW water-cooled diesel engine on power tiller. The engine performance tests were conducted to find out the effect of cooling water capacity of 2700cc, 2800cc, 2900cc, 3000cc, 3100cc on power, brake specific fuel consumption (BSFC), torque, temperature of cooling water and lubricating oil and friction losses of the engine with D. C. dynamometer. The results obtained in the study are summarized as follows: 1. The performance of the engine tested was adequated to Korea Industrial Standard but actual economy power was 10% higher than the labeled rated power of the engine. The BSFC of the engine tested 297.8g/kW-h which is belong a little higher level than hreign products. The temperature of cooling water was $101^{\circ}C$ which is higher than SAE standard ($88^{\circ}C$) 2. The friction losses of engine tested was 3.656 kW at 2200 rpm of rated rpm (piston speed 6.97m/sec) and is higher than those of foreign products. 3. When the cooling water capacity was increased from 2700cc to 3100cc the power output of the engine was increased from 6.7 kW to 7.13 kW at the rate of 6.4% and also the torque of the engine was increased from 28.85 N.m to 30.76 N.m at the rate of 6.39%. 4. When the cooling water capacity was increased from 2700cc to 3100cc, the BSFC was decreased 6.9g/kW-h from 310.9g/kW-h to 304.1g/kW-h, and after one half hour operation with full load, the temperature of cooling water was decreased $13^{\circ}C$ from $101^{\circ}C$ to $88^{\circ}C$ and also the temperature of lubricant oil was decreased $6.4^{\circ}C$ from $76.7^{\circ}C$ to $70.4^{\circ}C$. 5. The mechanical efficiency was increased from 70.08% to 71.08% when the cooling water capacity was increased from 2700cc to 3100cc.