Powder Preparation and Sintering Properties of PZT-Ceramics by Coprecipitation

공침법에 의한 PZT의 분체제조 및 소결특성

  • 안영필 (한양대학교 무기재료공학과) ;
  • 김복희 (전북대학교 재료공학과) ;
  • 이병우 (한양대학교 무기재료공학과)
  • Published : 1988.01.01

Abstract

In order to depress PbO vaporization during calcination and improve sinterability in low temperature, a method for preparing homogeous Lead-Zirconate-Titanate (PZT) powder from aqueous salt solution by precipitation is described. In this method, single phae PZT fine powders are formed at above 500$^{\circ}C$. PZT-ceramics using these powders have high sinterability, and good sintering characteristics relatively low temp. (-high apparent density, low porosity, low water adsorption etc.)

Keywords

References

  1. J. Am. Ceram. Bull. v.51 no.3 Effects of Calcining on Sintering of Lead Zirconate-Titanate Ceramics D. A. Buckner;P. O. Wilcox
  2. J. Am. Ceram. Bull. v.59 no.4 Reactivity of Zirconia in Calcining of Lead Zirconate-Lead Titanate Compositions Prepared from Mixed Oxides S. Venkataramani;J. V. Biggers
  3. J. Electrochem. Soc. v.132 no.7 Effect of Powder Characteristics on Microstructure and Properties in Alkoxide-Prepared PZT Ceramics R. C. Buchanan;J. Boy
  4. J. Am. Ceram. Bull. v.53 no.5 Chemical Preparation of PLZT Powders from Aqueous Nitrate Solution J. Thomson, JR
  5. J. Am. Ceram. Bull. v.60 no.2 Nonconventional Powder Preparation Techniques David W. Johnson, JR.
  6. J. Am. Ceram. Soc. v.50 no.9 Effect of PbO Deficiency on the Piezoelectric Properties of Lead Eirconate-Titanate Ceramics A. H. Webster;T. B. Weston