한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제26권2호
  • /
  • Pages.228-234
  • /
  • 1989
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지

Yttria-alumina계 소결조제를 이용한 탄화규소의 상압소결

Pressureless-sintering of Silicon Carbide with Additiions of Yttria and Alumina

  • 김도형 (산업과학기술연구소 무기재료연구분야) ;
  • 장철우 (산업과학기술연구소 무기재료연구분야) ;
  • 박병학 (산업과학기술연구소 무기재료연구분야) ;
  • 백성기 (산업과학기술연구소 무기재료연구분야)
  • 발행 : 1989.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pressureless-sintering of SiC with additions of yttria and alumina was studied. SiC could be densified to about 97% of its theoretical density at 185$0^{\circ}C$ which is about 20$0^{\circ}C$ below the normal sintering temperature of SiC with boron and carbon. Yttria and alumina formed intergranular liquid phases at the sintering temperature and promoted densification by the liquid phase sintering mechanism. The microstructure of sintered specimens was equiaxed and the liquid phase appeared to wet and dissolve SiC grains. The fracture toughness was measured by indentation method and found to be 5.3MPa.m1/2. Processing flaws near the surface of specimens appeared to be the major fracture origin during 3-point bending tests.

키워드

참고문헌

  1. Ceram Proc v.7 Processing and properties of structural silicon carbide T.J.Whalen
  2. J. Am. Ceram Soc. v.69 Effective sintering aids for silicon carbide ceramics Reactivities of silicon carbide with various additives K.Negita
  3. Fracture Mechanics Applied to Brittle Materials Use of indentation fracture to determine fracture toughness R.H.Marion
  4. Ceramics for High Performance Applications Sintering of silicon carbide S.Prochazka;J Burke(ed.);A Gorum(ed.); R.Katz(ed.)
  5. M.S.Thesis Effects of surface finish and abnormal grain growth on the strength of sintered silicon carbide Y H.You
  6. Phase Diagrams for Ceramists v.2 N.A.Toropov;I.A.Bondar;F Y.Galakhov;X.S.Nikogosyan;N V.Vinogradova
  7. M.S Thesis Behavior of isolated pores during liquid phase sintering of MgO-CaMgSiC₄ system B.M Song
  8. Reports Res. lab. Asahi Glass Co. v.36 no.1 Pressureless sintering of silicon carbide with addition of aluminum oxide K.Suzuki
  9. J. Mat. Sci. v.10 Hot-pressing behavior of silicon carbide powders with additions of aluminum oxide F.F.Lange
  10. J. Am. Ceram Soc. v.68 Densification and properties of alpha-silicon carbide S.Dutta
  11. J Am. Ceram. Soc. v.66 Intergranular crack-deflection toughening in silicon carbide K.T.Faber;A.G.Evans