Effects of the Colloid/Interface Variables on Densification and Pore Elimination of Zirconia

콜로이드/계면변수가 Zirconia의 치밀화와 기공제거에 미치는 영향

  • 장현명 (포항공과대학 재료·금속공학과) ;
  • 한규호 (포항공과대학 재료·금속공학과) ;
  • 이기강 (경기대학교 공과대학 재료공학과) ;
  • 정한남 (산업과학기술연구소 에너지 연구부)
  • Published : 1990.02.01

Abstract

The sintering characteristics of ZrO2 were analyzed in terms of pore microstructure and kinetics of pore elimination. The pore structue of the ZrO2 sample prepared from colloid suspension was characterized by three distinct types of pores ; intradomain, interdomain, and intergglomerate pores. Sintering data at 1600$^{\circ}C$ showed that pores larger than a certain critical size(∼3$\mu\textrm{m}$) were difficult to remove, and this was analyzed in terms of the interagglomerate pore formed from the suspension under the condition of low kinetic stability, that is, the stability ratio smaller than its critical value. A theoretical equation for densification rate was derived and was applied to the densification rate of the ZrO2 polycrystalline body containging both the matrix(the 1st-generation) pores and the interagglomerate (the 2nd-generation) pores under the condition of slow grain growth.

Keywords

References

  1. Ceramic Microstructures v.21 M.P. Harmer;J.H. Zhao;J.A. Pask(ed.);A.G. Evans(ed.)
  2. Ceramic Powder Science M.F. Yan;G.L. Messing(ed.);E.R. Fuller, Jr(ed.);H. Hausner(ed.)
  3. Ceramic Processing Before Firing G.Y. Onoda, Jr.;L.L. Hench;G.Y. Onoda, Jr.(ed.);L.L. Hench(ed.)
  4. J. Appl. Phys. v.32 Sintering Crystalline Solids:Ⅰ, Intermediate and Fianl Stage Diffusion Models R.L. Coble
  5. J. Am. Ceram. Soc. v.71 no.7 Effect of Pore Distribution on Microstructure Development Ⅱ. First-and Second-Generation Pores J. Zhao;M.P. Harmer
  6. Science of Ceramic Chemical Processing R.K. Iler;L.L. Hench(ed.);D.R. Ulrich(ed.)
  7. 한국요업학회지 v.27 no.1 Zirconia 성형체의 미세구조와 콜로이드/계면변수와의 상관 관계에 대한 분석 장현명;한규호;이기강;정한남
  8. J. Am. Ceram. Soc. v.69 no.11 Fractal Dimension of Model Particle Packings having Multiple Generation of Agglomerates G.Y. Onoda;J. Toner
  9. J. Am. Ceram. Soc. v.65 no.2 Sintering of Mullite Containing Materials Ⅱ. Effect of Agglomerates M.D. Sacks;J.A. Pask
  10. Rheologic Acta. v.16 no.5 Energy Dissipation in Sheared Coagulated Sols T.G.M. van de Ven;R.J. Hunter
  11. J. Am. Ceram. Soc. v.67 no.2 Sinterability of Agglomerated Powders F.F. Lange
  12. J. Am. Ceram. Soc. v.72 no.5 Thermodynamics of Densification:Ⅰ, Sintering of Simple Partcle Arrays, Equilibrium Configurations, Pore Stability and Shrinkage B.J. Kellett;F.F. Lange
  13. Sintering and Related Phenomena W.D. Kingery;B. Francois;G.C. Kuczynski(ed.);N.A. Hooton(ed.);C.F. Gibbon(ed.)
  14. J. Am. Ceram. Soc. v.72 no.5 Effects of Particle Packing Characteristics on Solid-State Sintering J. Zheng;J.S. Reed
  15. High Temperature Materials R.C. Garvie;A.M. Alper(ed.)
  16. J. Am. Ceram. Soc. v.68 no.1 Structure and Ionic Mobility of Zirconia at High Temperature P. Aldebert;J. Traverse
  17. J. Am. Ceram. Soc. v.71 no.2 Effect of Pore Distribution on Microstructure Development:Ⅰ, Matrix Pores J. Zhao;M.P. Harmer
  18. 미 발표연구 결과 장현명