Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of Oxygen Partial Pressure on Tungsten-Alumina Bonding Behavior

텅스텐-알루미나 접합거동에 미치는 산소분압의 영향

  • 박정현 (연세대학교 공과대학 요업공학과) ;
  • 이상진 (연세대학교 공과대학 요업공학과)
  • Published : 1990.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The tungsten paste was printed on the surface of 92% alumina sheet which was made by type casting process. The printed tungsten was bonded on the Al2O3 by co-firing in reducing atmosphere. During the co-firing, the binder burn-out was easier in wet H2 atmosphere than in dry H2, which affected sintered density. In practically, the use of wet H2 above 100$0^{\circ}C$ was beneficial for density of alumina and bond strength. This phenomena occured more distinctly when atmosphere varied from dry H2 to wet H2 than varied dew point in wet H2. In wet H2, the improvement in bonding strength can be attributed to good glass migration into the metal layer due to inhibition of the tungsten particle growth, with increase of alumina density, at the temperatrue higher than 100$0^{\circ}C$.

Keywords

References

  1. J. Am. Ceram. Soc. v.36 no.5 Metallographic Examination of Ceramic-Metal Seals A.G. Pincus
  2. Am. Ceram. Soc. Bull. v.56 no.4 Reminiscences about Metallized Ceramics and Their Use in Seals A.G. Pincus;S.H. Chang
  3. Solid State Tech. Furnace Atmosphere's Effect on Cofiring Tungsten-Alumina Multilayer Substrates A. Hayduk;K. Berger
  4. Am. Ceram. Soc. Bull. v.60 no.1 Interfacial Bond Strength in Alumina Ceramics Metallized and Cofired with Tungsten K. Otsuka;T. Usami;M. Sekihata
  5. High Tech Ceramics 1400℃ Alumina-Tungsten Co-sintering A. Bettinelli;P. Vincenzini(ed.)
  6. J. Am. Ceram. Soc. v.71 no.2 Pulverization and Dispersion Technique for Aggromerated Particles of Alumina Powder in a Slurry T. Ueyama;H. Wada;N. Kaneko
  7. Am. Ceram. Soc. Bull. v.65 no.4 Fish Oil and Triglycerides as Dispersants for Alumina D. Calvert;S. Tormey;L. Pober
  8. J. Am. Ceram. Soc. v.44 no.6 Glass-Migration Mechanism of Ceramic-to-Metal Seal Adherence S.S. Cole;G. Sommer
  9. Am. Ceram. Soc. Bull. v.42 no.2 Effect of Composition and Crystal Size of Alumina Ceramics on Metal-to-Ceramic Bond Strength J.R. Froyd
  10. Non-oxide Technical and Engineering Ceramics Oxidation Removal of Organic Binders from Injection-molded Ceramics B.C. Mutsuddy
  11. Solid State Tech. Effect of Atmosphere Composition on Metallizing Al₂O₃ Substrates with Mo-Mn Paste A. Hayduk.
  12. J. Mater. Sci. v.24 no.1 Co-sintering Alumina with Cobalt or Chromium Doped Tungsten at 1400℃ J. Guille;A. Bettinelli;J. Boissier;J.C. Bernier
  13. J. Mater. Sci. v.10 no.3 High-temperature Metallizing-Part 1 : The Mechanism of Glass Migration in the Production of Metal-Ceramic Seals M.E. Twentymen