Preparation of Fine Titanium Nitride Powders from Titanium Trichloride

염화티타늄(III)으로부터 질화티타늄 미분체의 합성

  • 이진호 (부산대학교 무기재료공학과) ;
  • 장윤식 (부산대학교 무기재료공학과) ;
  • 박홍채 (부산대학교 무기재료공학과) ;
  • 오기동 (부산대학교 무기재료공학과)
  • Published : 1990.07.01

Abstract

The preparatin of the fine TiN powders by reduction-nitridation of TiCl3-Al-N2 system was attempted in the temperature range from 350$^{\circ}$to 100$0^{\circ}C$. The formation mechanism and kinetics of TiN were examined, and the resultant TiN powder was characterized by means of XRD, PSA and SEM-EPMA methods. TiN was formed at temperatrue higher than $600^{\circ}C$. As an intermediate phase, AlTi was obtained. The apparent activation energy for the formation of TiN was approximately 4.2kcal/mole(600$^{\circ}$~90$0^{\circ}C$). The crystallite size and lattice constnat of TiN powder obtained in the temperature range from 600$^{\circ}$to 100$0^{\circ}C$ for 2h at the Al/TiCl3 molar ratio of 1.0 were 160~255A and 4.231~4.239A, respectively. According to PSA measurement, the mean particle size ranged from 14.0 to 14.8${\mu}{\textrm}{m}$.

Keywords

References

  1. Transition Metal Carbides and Nitrides L.E. Toth
  2. Ceramic Microstructures R.M. Fulrath;J.A. Pask
  3. Harstoffe und Hartmetalle R. Kieffer;P. Schwarzkopf
  4. Trans. Faraday Soc. v.46 F.H. Pollard;P. Woodward
  5. J. Electrochem. Soc. v.122 K. Sugiyama;S. Pac;Y. Takahashi;S. Motojima
  6. Z. Anorg. Allgem. Chem. v.143 E. Friedrich;L. Sitting
  7. J. Nucl. Sci. Tech. v.3 T. Mukaibo;M. Kanno;T. Mitamura;K. Yoshihara
  8. Elements of X-ray Diffraction B.D. Cullity
  9. Elements of X-ray Diffraction B.D. Cullity
  10. Crystallographic Society, Jpn. UNICS Program
  11. Nippon Kagaku-Kaish v.7 M. Takaouchi;T. Mori;T. Ida;T. Mitamura
  12. 名工試報告 v.11 新居善三郎;林宏;中村專一;東伸行
  13. Yogyo-Kyokai-Shi v.88 no.5 S. Okada;T. Atoda
  14. Z. Anorg. Allg. Chem. v.259 P. Ehrlich
  15. Acta Physicochim v.11 A. Brager