Properties of the Dynamically Cured EPDM and HDPE Cure-blend

전단력 하에서 가교된 EPDM과 HDPE블렌드의 물성 ; Cure-blend에 대한 연구

  • Ha, Chang-Sik (Department of polymer Science and Engineering, Pusan National University) ;
  • Cho, Won-Jei (Department of polymer Science and Engineering, Pusan National University)
  • 하창식 (부산대학교 공과대학 고분자공학과) ;
  • 조원제 (부산대학교 공과대학 고분자공학과)
  • Published : 1990.06.30

Abstract

The blends of ethylene-propylene-diene terpolymer (EPDM) and high density polyethylene (HDPE) have been studied. Blends were prepared in a laboratory internal mixer, where EPDM was cured under shear with dicumyl peroxide (DCP) in the absence of HDPE and later blended with HDPE (cure-blend). The effect of DCP concentration, shear intensity of the mixing, and rubber/plastic composition were studied on the rheological, thermal and physical properties of the cure-blend. The results obtained were compared with those from blend-cure of Lee and Kim's work and discussed.

Keywords