Effects of Sintering Schedule of Ni-Zn Ferrites on Properties of Electromagnetic Wave Absorber between 30 MHz and 1000 MHz

30 MHz~1000 MHz 고주파 대역에서 Ni-Zn 계 페라이트의 소결조건에 따른 전파흡수 특성

  • 김경용 (한국과학기술원 세라믹스연구단) ;
  • 김왕섭 (한국과학기술원 세라믹스연구단) ;
  • 주윤돈 (한국과학기술원 세라믹스연구단)
  • Published : 1991.08.01

Abstract

Recently intensive studies have been focussed on ferrites which have high magnetic loss because of the increasing need for the prevention of EMI (Electromagnetic Interference). We investigated effects of microstructures of Ni-Zn ferrites on magnetic losses, magnetic properties, and behaviors of electromagnetic wave absorbers. The characteristics of the absorber were influenced by the sintering conditions. A Ni-Zn ferrite with the thickness of 7$^{\circ}C$/min and the cooling rate of 7$^{\circ}C$/min. It satisfied the absorbing properties in the wide frequency ranges including VHF (90∼220 MHz), UHF (470∼770 MHz)

Keywords

References

  1. Am. Ceram. Soc. Bull. v.66 no.10 Development of Magnetic Ferrite: Control and Application of Losses K. Ishino;Y. Narumiya
  2. Electronic Ceramics Lionel M Levinson
  3. IEEE Trans. Instrum Meas v.IM-19 no.377 Measurement of the Intrinsic Properties of Materials by Time Domain Techniques A.M. Nicolson;G.F. Rosset
  4. Introduction to Ceramics W.D. Kingery;H.K. Bowen;D.R. Uhlmann
  5. Ferrites J. Smit;H.P.J. Wijn
  6. Ferrite, Electronic Material Series 平賀貞太郞;尾島輝彦
  7. Am. Ceram. Soc. Bull. v.64 no.4 Microstructural Dependence of Permeability and Permeability Spectra in Ni-Zn Ferrites S.I. Pyun;J.T. Baek
  8. IEEE Trans. on Magnetics v.25 no.6 Microstructure and Properties of Ni-Zn Ferrite Sintered from Slip Cast Colloidally Prepared Particles T.Y. Tseng;J.C. Lin