Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

The Solid State Bonding or ZrO2/NiTi: (I) Optimizating of Bonding Condition and its Strength

ZrO$_2$와 NiTi 합금의 고상접합 : (I)접합의 최적조건 및 접합강도

  • Kim, Young-Jung (Seoul National University, College of Engineering Dept. of Inorg. Materials Eng) ;
  • Kim, Hwan (Seoul National University, College of Engineering Dept. of Inorg. Materials Eng)
  • 김영정 (서울대학교 공과대학 무기재료공학과) ;
  • 김환 (서울대학교 공과대학 무기재료공학과)
  • Published : 1991.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Stabilized Zirconia (3 mol % Yttria, 3Y-TZP) was joined with intermetallic compound NiTi which has similar thermal expansion coefficient. The optimum bonding condition was determined by the Taguchi Method. Under the optimum bonding condition, the 4-point bending strength was as high as 400 MPa. bonding interfaces were examined by optical microscope, SEM, and TEM; reaction products were identified by XRD and TEM, The relationship between products and strength was examined.

Keywords

References

  1. Ceramic Bulletin v.67 no.2 Joining of Ceramics Ronard E. Loehman;Antoni P. Tomsia
  2. Ceramic Bulletin v.68 no.9 Issues in Ceramic-to-Metal Joining: An Investigation of Brazing a Silicon Nitride-Based Ceramic to a Low-Expansion Superalloy Shinhoo Kang;Edmund M. Dunn;Hohn H Selverian;Han J. Kimm
  3. Welding Reach Council Bulletin v.178 no.1-42 Joining Ceramics to Metals and Other Materials H.E. Pattee
  4. J. Am. Ceram. Soc. v.70 no.2 Effect of Joint Thickness and Residual Stresses on the Properties of Ceramic Adhesive Joints: I, Finite Element Analysis of Stresses in Joints Henry P. Kirchner;Joseph C. Conway;Jr.;A.E. Segall
  5. J. Am. Ceram. Soc. v.70 no.2 Effect of Joint Thickness and Residual Stresses on the Properties of Ceramic Adhesive Joints: Ⅱ, Experimental Results Wieslaw A. Zdaniewski;Joseph C. Conway;Jr.;henry P. Kirchner
  6. Engineering Property Data on Selected Ceramics v.Ⅲ. Single Oxides.5.4.5 Oxides of Zirconium and Hafnium.
  7. 日本せラツクス 協會學術論文誌 v.96 no.12 Pressureless Bonding of 3Y-TZP and Fe Using Ti Sheet Eiji Kogure;Hirokuni Hoshino;Takeaki Iida;Takashi Mitamura
  8. J. of Materials Science Letters v.5 Sold-state Bonding of Partially Stabilized Zirconia to Steel with Titanium Interlayer K. Suganuma;T. Okamoto;M. Koizumi;M. Shimada
  9. 新素材便覽 1990 通産資料調査會; D 形狀記憶合金材料
  10. Quality Engineering Using Robust Design. Madhav Prentice Hall
  11. Met. Trans. v.2 Homogeneity Range and the Martensitic Transformation in TiNi R.J. Wasilewski;S.R. Butler;J.E. Hanlon;D. Worden