Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Correlation of Orthogonal Cutting all sorts Parameter and Acoustic Emission Signal

2차원 절삭시의 각종 파라메터와 음향 방출 신호와의 상호 관계에 관한 연구

  • 김재열 (조선대학교 정밀기계공학과) ;
  • 심재기 (조선대학교 정밀기계공학과) ;
  • 박환규 (조선대학교 정밀기계공학과) ;
  • 오환교 (조선대학교 기계공학과)
  • Published : 1991.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

A study on the Correlation of Orthogonal Cutting Parameter (Cutting speed, Depth of cut, Feed Rate) and Acoustic Emission Signal. It is well known that acoustic emission (AE) is the emission of elastic wave resulting from the deformation and fracture of materials. This study estabished correlation of orthogonal cutting parameter and AE signal, and researched into in-process monitoring of tool wear and failure. The results are as follow; 1. AE RMS was under the influence of cutting speed but hardly influenced by depth of cut and feed rate. 2. AE RMS was under the influence of flank wear. 3. AE count rate increased by increased cutting speed. 4. AE RMS value was rapidly increased in 130 m flank wear.

Keywords