Characteistics of a CMOS Differential Input-Stage Using a Source-Coupled Backgate Pair

Source-Coupled Backgate쌍을 이용한 CMOS 차동입력단의 특성

  • Kang, Wook (Dept. of Elec Eng., Korea Univ.) ;
  • Lee, Won-Hyeong (Dept. of Elec Eng., Korea Univ.) ;
  • Han, Woo-Jong (Electronics and Telecommunications Research Institute) ;
  • Kim, Soo-Won (Dept. of Elec Eng., Korea Univ.)
  • 강욱 (고려대학교 전자공학과) ;
  • 이원형 (고려대학교 전자공학과) ;
  • 한우종 (한국전자통신연구소) ;
  • 김수원 (고려대학교 전자공학과)
  • Published : 1991.01.01

Abstract

It is well known that the conventional differential source-coupled pair uses gates as its input terminals. This input pair provids a high open-loop gain, a large CMRR, and a good PSRR. For these reasons, the input pair has been used widely as an input stages of the differential amplifiers, but a narrow linear input range of this structurelimits its application in the area of some analog circuit design. A novel CMOS source-coupled backgate pair is proposed in this paper. The bulk of MOSFET is exploited and input devices are biased to operate in ohmic region. With this topology, the backgate pair of the wide linear input range and variable transconductance can be obtained. This backgate input differential stage is realized with the size of W/L=50/25 MOSFETs. The results show the nonlinear error is less than $\gamma$1% over 10V full-scale range for the bias current of 200$\mu$A with 10V single power-supply.

Keywords