Post-Processing Technique on the Determination of Crack Tip Stress Intensity Factors

균열선단 응력확대계수 결정을 위한 후처리기법

  • 진치섭 (부산대학교 공과대학 토목공학과) ;
  • 장희석 (부산공업대학 토목공학과)
  • Received : 1990.09.18
  • Published : 1991.03.31

Abstract

The determination of the stress intensity factors is investigated by means of a surface integral defined around the crack tip of the structure. It has been shown in this work that this integral is derived from the standard path integral J. The use of the surface integral has also been extended to the case where body forces act. Computer program obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length/crack length)is about 25 percent, relatively correct $K_I$ and $K_{II}$ values can be obtained for the exterior radius ranging from 1/3 to 1 of the crack length.

본 논문에서는 구조물의 응력확대 계수를 균열선단주위에서 정의되는 표면적분법에 의하여 구하는 방법을 연구하였다. 통상의 J적분법을 변형시켜 표면 적분법을 유도하였으며 물체력을 고려하는 경우도 포함시켰다. 유한요소 해석결과를 입력변수로 받아들여 표면적분법으로 응력확대계수 $K_I$$K_{II}$를 구하는 프로그램을 작성하였다. 형상비(요소길이/균열길이)가 25% 정도인 요소망에서 본 논문에서 제안한 포물선형태의 평활곡선함수를 사용한 결과, 외측적분반경이 균열길이의 1/3~1 되는 구간에서 비교적 정확한 응력확대 계수가 얻어지는 것을 알수 있었다.

Keywords

Acknowledgement

Supported by : 한국과학재단