Effect of Additives on Electromagnetic Properties in EMI Noise Filters for High Frequency Region

고주파 대역 EMI 노이즈 필터 제조시 전자기적 특성에 미치는 첨가물 효과

  • 박진채 (고려대학교 재료공학과) ;
  • 김병호 (고려대학교 재료공학과) ;
  • 김왕섭 (한국과학기술연구원 세라믹공정실) ;
  • 김경용 (한국과학기술연구원 세라믹공정실)
  • Published : 1992.08.01

Abstract

Effects of additives on electromagnetic properties of a Ni-Cu-Zn ferrite for a noise filter in high frequency regions were studied. Both resistivity and permeability were increased with the amount of Mn2O3 up to 1wt%, then decreased with further addition. Addition of Co2O3 decreased the permeability of the ferrite and shifted the resonance frequency to a higher frequency region, which was thought due to the stabilization of domain walls. Therefore it was possible to improve both the permeability and the loss and to control the cut-off frequency by the concurrent addition of Mn2O3 and Co2O3.

Keywords

References

  1. AMP 12th Annual connector symposium v.68 EMI Control Techniques Using Filtered Connectors P. Dobrogowski;J. Schroeder Ⅲ
  2. EMC Hand Book 3 D.R.J. White(et al)
  3. Electronic Ceramics Lionel M. Levinson
  4. IEEE Trans. v.MTT-34 no.1 A Broad-Band, Automated Strip Line Techinnique for the Simultaneous Mearurment of Complex Permitivity and Permeability W. Barry
  5. IEEE v.MTT-31 A Fast Computational Technique for Accurate Permitivity Determination Using Transmission Line Methods L.P. Lighthart
  6. Elecment of X-ray Diffraction B.D. Cullity
  7. Physics of Magnetism S Chikazumi
  8. J. Chem Phys. v.23 High-Resistivity Nickel Ferrite-the Effect of Minor Additions Manganese or Cobalt L. G. Van Uitert
  9. J. Phys. Supple. v.38 High-Frequency Properties of Ni-Zn-Co Ferrites in Relation to Iron Content and Microstructure J.G.M. DELAU. A Brocse Van Groenou