Cooking Properties of Dry Noodles Prepared from HRW-WW and HRW-ASW Wheat Flour Blends

미국밀과 호주밀의 제면성 비교

  • Shin, Sung-Young (Department of Food Science and Nutrition, Dankook University) ;
  • Kim, Sung-Kon (Department of Food Science and Nutrition, Dankook University)
  • 신숭녕 (단국대학교 식품영양학과) ;
  • 김성곤 (단국대학교 식품영양학과)
  • Published : 1993.06.01

Abstract

The rheological properties of hard red winter, western white and Australian standard white wheat flours and of HRW-WW and HRW-ASW wheat flour blends having the same protein content were studied. Cooking properties of dry noodles prepared from HRW-WW and HRW-ASW wheat flour blends were also investigated. The noodles were prepared with salt and alkaline reagent. The salt and alkaline concentrations used were 1.7% and 0.17%. respectively, based on the weight of wheat flour. The alkaline reagent was an equal mixture of sodium carbonate and potassium carbonate. The HRW-ASW wheat flour blend had higher farinograph absorption and slightly stronger curve than HRW-WW wheat flour blend. Salt decreased the absorption of wheat flours by 2 and of wheat flour blends by 1%. However, alkaline reagent essentially had no effort on farinograph absorption. Salt and alkaline reagent strengthened the dough of wheat floors and wheat flour blends, with the former being more effective. No significant differences in pasting properties between HRW-WW and HRW-ASW wheat flour blends by amylograph were observed. There were no significant differences in rate of increase of weight or volume between noodles prepared from HRW-WW and HRW-ASW wheat flour blends. Alkaline reagent did not affect the weight gain of noodles hut lowered the volume gain. Breaking force of dry noodles and cutting force of cooked noodles were similar between the two noodles. Alkaline reagent increased both the breaking and cutting forces of noodles. Sensory evaluation revealed that the noodles prepared from HRW-WW and HRW-ASW wheat flour blends were slightly different. but not different from each other by preference test.

호주밀인 Australian standard white(ASW) 밀가루의 제면 적성을 알아보기 위하여, 단백질 함량이 같은 HRW-WW와 HRW-ASW의 혼합 밀가루를 만들어 이들 밀가루의 물리적 특성과 첨가제(소금 1.7%, 알칼리제 0.17%)의 영향을 분석하고, 건면을 제조하여 건면의 조리 성질과 조리된 국수의 관능검사를 실시하였다. 파리노그람에서 HRW-WW와 HRW-ASW 혼합 밀가루의 흡수율은 각각 57.5 및 59.2%이었으며, 소금을 첨가한 경우에는 밀가루의 흡수율이 약 2%, 혼합 밀가루의 흡수율은 약 1% 정도 감소되었으나 알칼리제는 밀가루 또는 혼합 밀가루의 흡수율에는 영향을 주지 않았다 소금과 알칼리제는 밀가루 및 혼합 밀가루의 반죽 강도를 증가시켰으며 그 효과는 소금만 첨가했을 때가 더욱 뚜렷하였다. 아밀로그람에 있어서 HRW-WW와 HRW-ASW 밀가루는 비슷한 아밀로그람 커브를 보였으며 점도도 비슷하였다. 조리에 따른 건면의 무게와 부피 증가율은 HRW-WW와 HRW-ASW 혼합 밀가루로 만든 두 국수사이에 뚜렷한 차이를 보이지 않았다. 그러나 알칼리제를 첨가한 국수의 경우에 있어서 부피 증가는 소금만 첨가한 경우보다 낮았다. 건면의 파쇄력 값과 조리된 국수의 절단력 값을 t-test 검정 결과 두 국수 사이에는 유의적 차이를 보이지 않았다. 또한 이들 값은 소금만 첨가한 국수보다 알칼리제를 함께 첨가한 국수가 모두 높았다. 조리된 국수의 관능검사에 있어서 HRW-WW와 HRW-ASW 혼합 밀가루로 만든 두 국수는 첨가제에 관계없이 유의적으로 달랐으나 그 차이는 미미한 것으로 인식되었다. 국수에 대한 기호도 평가에서는 두 국수 사이에 유의적 차이를 보이지 않았다.

Keywords