Toughening of Ni Bonded $Cr_3C_2$ by Mo Particulates

Mo 입자에 의한 Ni 결합 $Cr_3C_2$의 고인성화

  • 한동빈 (산업과학기술연구소 무기재료연구분야) ;
  • 장철우 (산업과학기술연구소 무기재료연구분야) ;
  • 백성기 (산업과학기술연구소 무기재료연구분야) ;
  • 박병학 (산업과학기술연구소 무기재료연구분야)
  • Published : 1993.06.01

Abstract

Cr3C2 material is characterized by high chemical stability and poor sinterability with low strength [50~150MPa]. In his study, low melting temperature nickel powder was used to improve sinterability as well as strength. In addition, molydenum particles were added to the Ni-bonded Cr3C2 cermet pseudomatrix to increase resistance to fracture. The specimens made by hot-pressing under vacuum and strength was measured by 4-point bending. Indentation cracking and fractographic examination were conducted to study the interaction of the indentation cracks with the reinforcing particles. Toughening mechanisms and failure will be discussed in terms of crack/particle interactions and compared with previous works.

Keywords

References

  1. Ceram. Bull. v.65 no.2 Processing of Metal and Ceramic Composites J.A. Cornie;Y.M. Chiang;D.R. Vhlmann;A. Mortensen;J.M. Collins
  2. Ceram Sci & Eng. Proceeding v.2 no.7-12 Mechanisms of Toughening in Ceramic Matrix Composites Rw. Rice
  3. Fracture Mechanics v.Ⅳ Fracture of Brittle Particlate Composites D.J. Green;P.S. Nicholson;R.C. Bradt(ed.);A.G. Evans(ed.);D.P.H Hasselman(ed.);F F Lange(ed.)
  4. Phil. Mag. v.22 no.983-992 The Interaction of a Crack Front with a Second-Phase Dispersion F.F. Lange
  5. Phil. Mag. v.26 The Strength of Brittle Materials Containing Second Phase Dispersiona A.G. Evans
  6. J. Mater. Sci. v.3 no.629-634 The Stregth of Two-Phase Ceramic/Glass Material R.W. Davidge;TJ. Green
  7. J. Am. Ceram. Soc. v.49 no.9 Dispersion-Strengthed Alumina Oxide C.O. Mchugh;T.J. Whalen;M. Humenik. Jr.
  8. J. Am. Ceram. Soc. v.54 no.6 Hot-pressing and Mechanical Properties of Al₂O₃ with and Mo-Dispersed Phase D.T. Rankin;J.J. Stiglich;D.R. Petrak;R. Ruh
  9. J. Am. Ceram. Soc. v.64 no.9 Toughening of Glass by Metallic Particles V.V. Kirstic;P.S. Nicholson;R.G. Hoagland
  10. Acta Metall v.31 no.4 Crack Deflection Process-Ⅰ. Theory K.T. Faber;A.G. Evans
  11. Acta Metall v.31 no.4 Crack Deflection Process-Ⅱ. Experiment K.T. Faber;A.G. Evans
  12. J. Am. Ceram. Soc. v.72 no.2 Toughening of Ceramics thorugh Crack Bridging by Ductile Particles F. Erdogan;P.F. Joseph
  13. Fracture Mechanics v.Ⅰ The Interaction between Inclusions and Crack F. Erdogan;R.C. Bradt(ed.);A.G. Evans(ed.);D.P.H. Hasselman(ed.);F.F. Lange(ed.)
  14. Acta Metall. v.36 no.4 On the Toughness of Brittle Materials Reinforced with a Ductile Phase L.S. Sigl;P.A. Mataga;B.J. Dalgleish;R.M. McMeeking;A.G. Evans
  15. Acta Metall v.34 no.12 On the Toughening of Ceramic by Strong Reinforcements A.G. Evans;R.M. McMeeking
  16. Ph.D. Thesis Dongbin Han
  17. Mater Sci & Eng Fracture Behavior of Metal Particulate-Reinforced WC-Co Composites Dongbin Han;Jack J. Mecholsky
  18. J. Am. Ceram. Soc. v.64 no.9 A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness:Ⅰ Direct Crack Measurements G.R. Antis;P. Chantikul;B.R. Lawn;D.B. Marshall