Korean Journal of Optics and Photonics (한국광학회지)
- Volume 5 Issue 2
- /
- Pages.311-318
- /
- 1994
- /
- 1225-6285(pISSN)
- /
- 2287-321X(eISSN)
Fabrication and Characterization of Surface Plasmon Fiber-Optic Polarizers
표면 플라즈몬 광섬유 편광기의 제작 및 특성 조사
Abstract
We fabricated fiber-optic polarizers utilizing polarization selective mode coupling between the guided mode of a fiber and the surface plasmon mode supported by a thin aluminium film deposited on the polished side of a fiber. AI thin films with various thicknesses were coated onto the 633 nm, 830 nm, 1.3 fJITI single mode fibers. The maximum extinction ratio was higher than 30 dB for most of the samples and the best result was 42 dB at 90 A film thickness, with 1.3 fJITI single mode fiber. The insertion loss ranged from 0.2 dB to 1.5 dB.1.5 dB.
광섬유의 클래딩을 갈아내고 코어 가까이에 알루미늄 박막을 증착하여 표면 플라즈몬으로의 편광 선택적인 모드 결합 원리를 이용하는 광섬유 편광기를 제작하였다. 633nm, 830nm,
Keywords