Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

The Influence of CuO on Bonding Behaviors of Low-Firing-Substrate and Cu Conductor

저온소성 기판과 Cu와의 동시소성에 미치는 CuO의 첨가효과

  • 박정현 (연세대학교 공과대학 세라믹공학과) ;
  • 이상진 (연세대학교 공과대학 세라믹공학과)
  • Published : 1994.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new process which co-fires the low-firing-substrate and copper conductor was studied to achieve good bond strength and low sheet resistance of conductor. Cupric oxide is used as the precursor of conductive material in the new method and the firing atmosphere of the new process is changed sequently in air H2N2. The addition of cupric oxide and variations of firing atmosphere permited complete binder-burnout in comparison with the conventional method and contributed to the improvement of resistance and bonding behaviors. The potimum conditions of this experiment to obtain the satisfactory resistance and bond strength are as follows (binder-burnout temperature in air; 55$0^{\circ}C$, reducing temperature in H2; 40$0^{\circ}C$ for 30 min, ratio of copper and cupric oxide; 60:40~30:70 wt%). The bonding mechanism between the substrate and metal was explained by metal diffusion layer in the interface and the bond strength mainly depended on the stress caused by the difference of shrinkage and thermal expansion coefficient between the substrate and metal.

Keywords

References

  1. Advances in Ceramics v.26 Multilayered Ceramic Substrates with Low Dielectric Constant H. Emura;K. Onituka;H. Maruyama;M.F. Yan(ed.);K. Niwa(ed.);H.M. O'Bryan, Jr.(ed.);W.S. Young(ed.)
  2. Electronic Ceramics Ceramic Packaging of Integrated Circuits B.Schwartz;L.M. Levinson(ed.)
  3. Am. Ceram. Soc. Bull. v.71 no.9 Overview of the Glass-Ceramic/Copper Substrate-A High-performance Multilayer Package for the 1990s J.U. Knickerbocker
  4. セラミンク基板とろの應用 ニュ-ケラスツり-ス編集委員會
  5. Advances in Ceramics v.26 Low-k and Low-T Sintering Materials for Multilayer Circuit Boards K. Niwa;Y. Imanaka;N. Kamehara;S. Aoki;M.F. Yan(ed.);K. Niwa(ed.);H.M. O'Bryan, Jr.(ed.);W.S. Young(ed.)
  6. IEEE Trans. Components Hybrids Manuf. Tech. v.6 no.382-388 Low Firing Temperature Multilayer Glass-Ceramic Substrate Y. Shimano;K. Utsumi;M. Suzuki;H. Takamizawa;T. Watari
  7. Advances in Ceramics v.19 Multilayer Ceramic Circuit Board with Copper Conductor K. Niwa;N. Kamehara;H. Yokoyama;K. Yokouchi;K. Kurihara;J.B. Blum(ed.);W.R. Cannon(ed.)
  8. Advances in Ceramics v.26 A New Processing Technique for Multilayered Ceramic Substrates with Copper Conductors T. Ishida;S.I. Nakatani;T. Nishimura;S. Yuhaku;M.F. Yan(ed.);K. Niwa(ed.);H.M. O'Bryan, Jr.(ed.);W.S. Young(ed.)
  9. 한국요업학회 v.29 no.12 알루미나를 충전제로 첨가한 붕규산염 유리의 소결 및 결정화 방지기구에 대한 연구 박정현;이상진;성재석
  10. 한국요업학회 v.27 no.6 텅스텐-알루미나 접합거동에 미치는 산소분압의 영향 박정현;이성진
  11. Am. Ceram. Soc. Bull. v.53 no.5 Fine Grained Alumina Substrates; I, the Manufacturing Process D.J. Shanefield;R.E. Mistler
  12. IEEE Trans. Comp. Hybrids, Manuf Tech. v.3 no.2 Thick Film Technology: An Introduction to the Material J.R. Larry;R.M. Rosemberg;R.O. Uhler
  13. Ceramic Transactions v.1 Pyrolysis of Poly(Vinyl Butyral) Binder; I. Degradation Mechanisms W.K. Shih;M.D. Sacks;G.W. Scheiffele;Y.N. Sun;J.W. Williams;G.L. Messing(ed.);E.R. Fuller, Jr.(ed.);H. Hausner(ed.)
  14. Hybrid Microcircuit Technology Handbook JJ. Licari;L.R. Enlow
  15. J.Thermal Anal. v.33 no.871-874 In Situ Investigation of Distortion of Multilayer Structures at Elevated Temperatures G. Leitner;H. Balke;F. Schuster;I. Storbeck;M. Wolf