Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Effects of Accelerated Iso-Thermal Aging on Elastic-Plastic Fracture Toughness and Fracture Resistance Curve by Unloading Compliance Method in SA533B Low Alloy Steel

제하 컴플라이언스법에 의한 SA533B강의 $J_1C$ 및 J-R 곡선에 미치는 열시효 영향

  • 윤한기 (동의대학교, 공과대학기계설계학과) ;
  • 차귀준 (동명전문대학 가스냉동과)
  • Published : 1994.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Effect of an accelerated iso-thermal aging (375 degree C x 66days, 375 degree C x 200days) on elastic-plastic fracture resistance curve were examined in SA533B low alloy steel. Fracture toughness test are conducted by unloading compliance method at room temperature. But the apparent negative crack growth phenomenon, usually arise in partial unloading compliance test. The phenomenon of negative crack growth may be eliminated by the offset technique. There is no effect of aging on J sub(IC) and dJ/da in iso-thermal aged (375 degree C x 66 days) specimen, but there is very little effect in iso-thermal aged (375 degree C x 200 days) specimen.

Keywords

References

  1. Proc. of KIM-KSME Joint Symposium`90 Hong,J.H.
  2. Proc. of KIM-KSME Joint Symposium`90 Hur,S.K.
  3. Fracture Toughness Prediction for Pressure Vessel Steels, ASTM, MPC-24 Oldfield.(et al.)
  4. NUREG/CR-2110 A Critical Survey on the Applicaition of Plastic Fracture Mechanics to Nuclear Pressure Vessels and Piping Kanninen (et al.)
  5. ASTM E813-87 Standard Test Method for Jic
  6. JSME S001 Standard Test Method for Jic
  7. ASTM E1152-87 Standard Test Method for Determining J-R Curves
  8. ASTM STP 856 The Use of the Partial Unloading Compliance Method for the Determination of J-R Curve and Jic Voss,B.;Mayvile,R.A.
  9. Journal of Testing and Evaluation ASTM v.18 no.4 Jic Data Analysis Methods with Negative Crack Growth Correction Procedure, Rosenthal,Y.A.(et al.)
  10. 대한기계학회 논문집 v.16 no.9 J-R 곡선에서의 균열길이 감소현상에 대한 연구 (Ⅱ) 석창성;최용식
  11. 대한 기계학회 `91년도 추계학술대회 논문집 Jic 해석에서의 균열길이 감소현상에 대한 고찰 (Ⅲ) 최용식;석창성
  12. Trans.of ASME v.162 Hollomon,J.H.;Jaffe,L.D.
  13. 동의대학교 산업기술연구지 v.7 윤한기;차귀준
  14. Proc. KIM-KSME Joint Symposium`90 on Mechanical Behavior of Matrerials Aug. Yoon,H.K.(et al.)