Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지

A Study on the Hydrogenation Properties of TiNi Alloy Fabricated by Mechanical Alloying Method

기계적합금법에 의해 제조된 TiNi합금의 수소화반응특성에 관한 연구

  • Ahn, Hyo-Jun (Department of Metallurgical and Materials Engineering Gyeongsang National University) ;
  • Kim, Bo-Su (Department of Metallurgical and Materials Engineering Gyeongsang National University) ;
  • Hwang, Jin-Hwan (Department of Metallurgical and Materials Engineering Gyeongsang National University) ;
  • Ahn, In-Shup (Department of Metallurgical and Materials Engineering Gyeongsang National University) ;
  • Kim, Ki-Won (Department of Metallurgical and Materials Engineering Gyeongsang National University) ;
  • Hur, Bo-Young (Department of Metallurgical and Materials Engineering Gyeongsang National University)
  • 안효준 (경상대학교 공과대학 금속재료공학과) ;
  • 김보수 (경상대학교 공과대학 금속재료공학과) ;
  • 황진환 (경상대학교 공과대학 금속재료공학과) ;
  • 안인섭 (경상대학교 공과대학 금속재료공학과) ;
  • 김기원 (경상대학교 공과대학 금속재료공학과) ;
  • 허보영 (경상대학교 공과대학 금속재료공학과)
  • Published : 1994.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The hydrogenation behavior of Ti-Ni powders prepared by mechanical alloying in a high energy ball mill have been investigated by P-C isotherm curves, DSC(differential scanning calorimetry), X-ray diffractometer, SEM(scanning electron microscope). Amorphous TiNi phase was formed after 10 milling hours. The hydrogen storage capacity gradually decreased as a function of mechanical alloying time. There appears the DSC endothermic peak due to hydrogen evolution of amorphous hydride phase.

Keywords

Acknowledgement

Supported by : 한국학술진흥재단