한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제32권4호
  • /
  • Pages.413-418
  • /
  • 1995
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지

SHS 화학로에 의한 (B.Si)C 복합체의 합성 및 기계적 특성에 관한 연구

Study on Synthesis and Mechanical Properties of (B.Si)C Composite by Self Propagating High Temperature Synthesis Chemical Furnace

  • 발행 : 1995.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The (B.Si)C composite was prepared form the mixture of metal boron, silicon, and carbon powders in Ar atmosphere by Self-propagating High-temperature Synthesis Chemical Furnace. The characterization of synthesized power and sintered body were investigated. The microstructure of sintered body suggested that SiC boundary was made between B4C grains. The most excellent mechanical properties, the relative density of 95% oftheoretical value, 3 point flexural strength of 360MPa, and fracture toughness of 3.6MN/m3/2 could be obtained in 80wt% B4C-20 wt% SiC composite were obtained.

키워드

참고문헌

  1. J. Less-Commen Met. v.5 The Hardness at High Temperature of some Refractory Carbides and Borides L.M. Fitzerald
  2. Boron and Refractory Borides V.I. MatKovich(ed.)
  3. J. Less-Common Met. v.82 The Influence of Carbon on the Microstructure and Mechenical Properties of Sintered boron Carbide K.A. Schwetz;G. Grellner
  4. Mater. Sci. Res. v.13 Sintering of Pure and Doped Boron Carbide R.G. Lange;Z.A. Munir;G.C. Kuczinski(ed.)
  5. J. Am. Ceram. Soc. v.72 no.6 Microstructural Coarsening During Sintering of Boron Carbide S.L. Dole;S. Prochazkaet;R.H. Doremus
  6. Acad. Sci. USSR Chem. Phys. v.204 Self-Propagated High-Temperature Synthesis of Refractory Inorganic Compounds A.G. Merzhanov;I.P. Borovinskaya
  7. U.S.S.R. Patent No.556,110 A Method for Obtaining Refractory Compounds of Borides or Carbides A.G. Merzhanov(et al.)
  8. Journal of the Korean Ceramic Society v.30 no.8 Study on Synthesis and mechanical Properties of B₄C by Self Propagating High Temperature Synthesis Chemical Furnace Hyung-Back Lee;Duk-Ho Cho;Sung Park
  9. J. Am. Soc. v.72 no.5 Fabrications of Titanium Carbide Ceramics by High Pressure Self-Combution Sintering of Titanium Powder and Carbon Fiber S. Sadachi;T. Wada;T. Mihara;Y. Miyamoto;M. Koizumi;O. Yamada
  10. Applied Sciences v.185 Structure and Properties of Si-Doped Boron Carbide R. Telle;Robert Freer(ed.)
  11. J. Less-Common Metals v.67 Structures and Properties of Sintered Boron Carbide M.A. Kuzenkova;P.S. Kisly;B.I. Grabchuk;N.I. Boelnaruk
  12. Ceram. Eng. Sci. Proc v.6 no.7-8 Densification and Microstructural Development in boron Carbide S.L. Dole;S. Prochazka