Cited by
- Power 서보 실린더의 피스톤 헤드용 AlBC의 마멸 특성 vol.27, pp.2, 1995, https://doi.org/10.9725/kstle.2011.27.2.065
Tribology and Lubricants
- Volume 11 Issue 5
- /
- Pages.55-58
- /
- 1995
- /
- 2713-8011(pISSN)
- /
- 2713-802X(eISSN)
DOI QR Code
The Effects of Ni Addition in Cu Base Sintered Friction Material-Microstructure and Tribological Behavior
- Chung, D.Y. (Korea Military Academy) ;
- Kim, K.Y. (Daewoo Heavy Ind. Co.) ;
- Lee, B.J. (Daewoo Heavy Ind. Co.) ;
- Kim, J.G. (Daewoo Heavy Ind. Co.)
- Published : 1995.12.01
Abstract
The effects of Ni contents in Cu base sintered friction material were studied. The contents of Ni were increased up to 9 wt% in the Cu-Sn matrix. The microstincture and tribological behavior of the friction material were examined. Pin on disk type of constant speed friction test rig were used to measure the friction and the wear rates. The results show that Ni addition increased the friction coefficients and decreased the wear rates of the materials. Relations between microhardness of the matrix and friction properties have been discussed. In addition optimum Ni content is recommended through the analysis of wear debris.