Superplastic Properties of Al-Mg-Cu-Mn Alloys

Al-Mg-Cu-Mn 합금의 초소성 특성

  • 박종우 (한국과학기술연구원 금속연구부) ;
  • 김희수 (한국과학기술연구원 금속연구부) ;
  • 문인기 (한국과학기술연구원 금속연구부) ;
  • 하기윤 (대한알루미늄(주) 경금속기술연구소) ;
  • 이덕열 (고려대학교 공과대학 재료공학부)
  • Published : 1995.02.01

Abstract

Tnermomechanical treatment consisting of homogenizing, hot and warm rolling were introduced to Al-MgCu-Mn alloys for obtaining superplasticity. The factors affecting the superplasticity of the alloys were investigated by optical and transmission electron microscopy. Large particles which had not been decomposed during homogenizing treatments remained stable in the hot and warm rolling processes. These particles were a source of cavitation and poor elongation in superplastic deformation. On the other hand, fine precipitates were produced during thermomechanical processing, and resulted in improvement of superplasticity by stabilizing microstructure. Two-step homogenizing and air cooling process was more effective than onestep homogenizing and furance cooling process in removing microsegregations and producing fine particles.

Al-Mg-Cu-Mn계 합금을 가공열처리하고 초소성 특성을 조사한 후 광학 및 전자 현미경을 이용하여 초소성에 영향을 미치는 주요한 인자들을 조사하였다. 균질화 과정에서 제거되지 않은 조대한 2차상들은 그 후의 가공열처리 과정에서도 계속 잔류하여 초소성 변형 중 기공을 유발함으로써ㅓ 초소성 신율을 저하시켰다. 반면에 가공열처리 과정에서 생성된 미세한 석출물은 결정립 성장을 억제하여 조직을 안정화함으로써 초소성 특성을 향상시켰다. 균질화처리 조건은 2차상의 크기과 분포에 큰 영향을 주어 2단계 균질화-공냉처리는 1단계 균질화-노냉처리보다 조대한 2차상의 제거와 미세석출물의 생성에 효과적이었다.

Keywords

References

  1. Progress in Materials Science v.21 no.2 J.W. Edington; K.N. Melton;C.P. Cutler
  2. 輕金屬 v.39 no.11 大澤泰明;西村尙
  3. A.J. Barnes
  4. Metall. Trans. v.13A T.G. Langdon
  5. Acta Metall. v.22 V.A. Likhachev;M.M. Myshlyaev;S.S. Olevskii;T.N. Chuchman
  6. Trans. ISIJ v.27 no.730 H. Watanabe;K. Ohori;Y. Takeuchi
  7. Case Studies in Manufacturing with Advanced Materials v.1 A. Demaid;J.H.W. de Wit A. Demaid(ed.);M. Onillon(ed.)
  8. Mat. Sci. and Tech. v.1 O.D. Sherby;J. Wadsworth
  9. 제 8회 재료강도 심포지엄 김희수; 박종우;권오철;문인기;김종회;이희태;이덕열
  10. Superplasticity in Metals, Ceramics and Intermetallics, MRS Proceedings v.196 O.D. Sherby;J. Wadsworth;M.J. Mayo(ed.);M. Kobayashi(ed.);J. Wadsworth(ed.)
  11. Acta Metall. v.37 no.11 A.H. Chokshi;A.K. Mukherjee