Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 12 Issue 6
- /
- Pages.112-119
- /
- 1995
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
A Study on the Early Fracture Characteristics of Ceramic Tool for Carbon Tool Steel
탄소공구량에 대한 세라믹공구의 초기파손 특성에 관한 연구
Abstract
Early fracture and cutting force of ceramic tool for hardened STC3 steel was investigated in this study. It was found that early fracture of ceramic tool was mostly occurred before normal wear was progressed beyond a critical cutting speed and normal wear was performed under the critical cutting speed. The relationships among critical cutting speed, which was a cause of early fracture, suggested cutting cross section, that is, maximum thickness of cut and width of cut, and cutting force were examined. The following conclusions were obtained: (1)Critical cutting speed showed a high value in the case of small maximum thickness of cut and large nose radius, but was not influenced by width of cut, (2)Principal, feed and radial force, respectively, showed the proportional value to constant cutting area, width of cut and maximum thickness of cut orderly, (3)Occurrence of early fracture was dependent upon radial force.
Keywords