Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

Fundamental Study on Cathodic Protection and Material Development as Erosion - Control Methods of Oceanic Centrifugal Pump(2)

해상용 원심펌프 임펠러의 침식억제법으로 음극방식 및 재료개발에 관한 기초연구 (2)

  • 이진열 (한국해양대학교 선박운항시스템공학과) ;
  • 임우조 (부산수산대학교 기계공학과) ;
  • 오인호 (한국해양대학교 선박운항시스템공학과)
  • Published : 1996.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, with the rapid development in the oceanic systems such as the oceanic structures and vessel, there occurs much interest in the impingement erosion-corrosion. In this paper, Cu-metal was tested by using of erosion apparatus with water-jet type and was investigated under the behaviour of impingement erosion-corrosion according to various environmental conditions, and the properties of Cu-metal were evaluated through the measurement by weight loss, weight loss rate, protective efficiency. The results were compared with those obtained using Cu-metal applied to cathodic protection and Cu-alloys added to Zn or Al-metal. As a basis of those results, the best protective efficiencies could be taken as using cathodic protection method and Cu-alloy with Al & Zn material addings, and will be suggested as the fundamental data of the anti-impingement erosion-corrosion on Cu-metal of impeller material for oceanic centrifugal pump.

Keywords

References

  1. 機械の硏究 v.34 no.1 油壓系の潤滑問題 西本榮司
  2. Journal of Japanese Society of Tribologist v.36 no.5 Tribology of O/W Emulsion Manabumi Masuko;Kazumi Okada
  3. Corrosion Engineering v.31 no.2 Influence of Erosion on Corrosin Masanobu Matsumura;Yoshinori Oka
  4. Boshoku Gijutsu v.35 no.6 Mechanism of the Mutual Action between Erosion and Corrosion Yoshinori Oka;Hiroyuki Kouzai ;Masanobu Matsumura
  5. 日本防食技術 v.37 no.2 炭素鋼の氣 液2相流仲 ェロ ヅョンコロヅョンにおける 電氣化學的 作用 渡邊豊;高橋秀明
  6. Zairyo to Kankyo v.40 no.8 Erosion corrosion Behaviour of Copper Alloy under Flowing Water Condition Isao Sekine;Toshiyuki Tanaki
  7. Boshoku Gijutsu v.31 no.2 Erosion, Wear and Interfaces with Erosion on Corrosion A. Thiruvengadam
  8. 韓國腐蝕學會誌 v.20 no.4 캐비테이션에 의한 베어링재의 腐蝕. 浸蝕擧動에 관한 硏究(1) 林祐助;李鎭烈
  9. CORROSION NO.1 L. L. Shreir
  10. Metallographic Atlas Yoneo Kikuta
  11. Tribologist v.35 no.10 Oxidative Degradation of Engine oils Jinichi Igarashi
  12. Tribologist v.35 no.10 Cavitation Erosion in High Water Base Fluids (2nd report) Yoshiro Iwai;Tsunenori Okada;Takashi Nishimoto;Tadashi Morishita
  13. Soshoku Gijutsu v.39 no.1 Anodic Dissolution Mechanism of Copper in Alkaline Carbonate-Chloride Solution Ataushi Nishikata;Mashayuki Itakaki;Tooru Tsuru;Shiro Haruyama;Eiichiro Fujii
  14. CORROSION V. Ashworth
  15. Appl. Phys. v.25 Computer Simulation of the effect of Pre oxidation in Erosion - Corrosion environments M. M. Stack;F.H. Stott;G.C. Wood
  16. 材料と環境 v.39 no.11 古體粒子衝突エロジョンの材料硬度依存性 岡良則
  17. 腐食試驗法 日本化學工學會
  18. 日本防蝕技術 v.39 no.10 キャビテ ション攻擊を受ける金屬材料の壽命豫測 松村倉信;岡良則
  19. エロ-ション.コロジョン入門講習會テキスト 腐食防蝕協會
  20. 韓國舶用機關學會誌 v.19 no.2 林祐助 遠心펌프 임펠러의 浸蝕抑制法으로 陰極方飾 및 材料開發에 關한 基礎硏究 李鎭烈
  21. 韓國舶用機關學會誌 v.17 no.3 베어링 合金材의 캐비테이션 腐蝕 浸蝕擧動에 미치는 乳化 潤滑油의 影響 林祐助;李鎭烈
  22. 機械工學全書 v.6 腐食と防蝕 伊藤五郞
  23. 金屬の腐食防食序論 吉澤四郞;片桐晃;G. Wranglen(譯)