Effect of Interlayers on the Bending Strength of Silicon Nitride/Staineless Steel Joints

중간재가 질화규소/스테인레스 스틸 접합체의 굽힘강도에 미치는 영향

  • 박상환 (한국과학기술연구원 세라믹스 연구부) ;
  • 최영화 (한국과학기술연구원 세라믹스 연구부) ;
  • 김태우 (국민대학교 기계공학과)
  • Published : 1996.03.01

Abstract

The reactions between an active metal brazing alloy and interlayers together with the effects of interlayer type on the interfacial microstructure change were investiaged for silicon nitride/stainless steel joint. The bending strengths were measured for joints with Mo, Cu, Ni interlayer type of different thicknesses. It was found that the interlayer with a low yield strength value is effective to improve the bending strength of the Si3N4/stainless steel joint. The maximum joint strength obtained at room temperature for a laminated Cu/Mo interlayer was about 460 MPa. The combined use of Mo and thin Cu layer was found to be effective in enhancing the bending strength for the Si3N4/S.S.316 joint.

Keywords

References

  1. Am Ceram Bull v.67 no.2 Joining of Ceramics R.E. Loehman;A.P. Tompsia
  2. Mater. Sci and Tech. v.2 no.9 Ceramic/Metal Joining for Structural Application M.G. Nicholas;D.A. Mortimer
  3. Am. Ceram. Bull. v.68 no.9 Issues in Ceramic-to-Metal Joining;An Investigation of Brazing Silicon Nitride based Ceramic to a Low-Exapansion Superalloy S. Kang;E.M. Dunn;J.H. Selverian;H.J. Kim
  4. Acta Metall v.36 no.8 The Strength of Ceramics Bonded with Metals B.J. Dalgleish;M.C. Lu;A.G. Evans
  5. J. Am. Ceram. Soc. v.67 no.12 Interlayer Bonding Methods for Ceramic/Metal Systems with Thermal Expansion Mismatches K. Suganuma;T. Okamoto
  6. Proc. of the MRS Mtg. on Adv Mats. Residual Stress Relaxation in Si₃N₄/Metal Joined Systems S. Tanaka
  7. Proc. of the MRS Int. Mtg. on Adv. Mats. Effect of Pre-compression on the Strength of Ceramic/Steel Joint Y. Miyazawa;E. Suzuki;K. Hayashi
  8. Ceramic Transactions v.35 Interface Structures and Bonding Strength of Si₃N₄/304 Stainless Steel Joints W.C. Lee;O. Kwon;C.S. Kang
  9. Ceramic Transactions v.35 Interfacial Structure of Si₃N₄ Brazed with a Ag-Cu-Ti Alloy H. Suematsu;J.J. Petrovic;T.E. Mitchell
  10. Ceramic Transactions v.35 Promoting the Wetting and Brazing of Ceramics M.G. Nicholas
  11. Ceram. Eng. Sci. Proc. Mechanical Behavior of Brazed Silicon Nitride S.M. Johnson