Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Analysis of Bridging Stress Effect of Polycrystalline aluminas Using Double Cantilever Beam Method

Double Cantilever Beam 방법을 이용한 다결정 알루미나의 Bridging 응력효과 해석

  • 손기선 (포항공과대학교 항공재료연구센터) ;
  • 이선학 (포항공과대학교 항공재료연구센터) ;
  • 백성기 (포항공과대학교 항공재료연구센터)
  • Published : 1996.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study a new analytical model which can describe the relationship between the bridging stress and microstructure has beenproposed in order to investigate the microstructural effect on the R-curve behavior in polycrystalline aluminas since the R-curve can be derived via the bridging stress function. In the currently developed model function the distribution of grain size is considered as a microstructural factor in modeling of bridging stress function and thus the bridging stress function including three constants PM, n, and Cx, can be established analytically and quantitatively. The results indicate that the n value is closely related to the grain size distribution thereby providing a reliability of the current model for the bridging stress analysis. Thus this model which explains the correlation of the bridging stress distribution and microstructual parame-ters is useful for the systematic interpretation of microfracture mechanism including the R-curve behavior in polycrystalline aluminas.

Keywords

References

  1. Fracture Mechanics of Ceramics v.9 R-Curve Behavior of Ceramics R.W. Steinbrech;R.C. Bradt(ed.);D.P.H. Hasselman(ed.);D. Munz(ed.);M. Sakai(ed.);V. Ya. Shavchenko(ed.)
  2. J. Am. Ceram. Soc. v.73 no.2 Perspective on the Development of High-Toughness Ceramics A.G. Evans
  3. Acta Metall. v.29 Martensitic Transformations in Zirconia Particle Size Effect and Toughening A.G. Evans;N.H. Burlingame;W.M. Kriven;M.D. Drory
  4. J. Am. Ceram. Soc. v.65 no.5 Mechanics of Transformation Toughening in Brittle Materials R.M. McMeeking;A.G. Evans
  5. J. Am. Ceram. Soc. v.69 no.7 Strength Limitations of Transformation-Toughened Zirconia Alloys M.V. Swain;L.R.F. Rose
  6. J. Am. Ceram Soc v.69 no.3 Kinematical Model for Stress Induced Transformation around Crack L.R.F. Rose
  7. J. Am Ceram Soc v.72 no.6 Transformation Zone Shape, Size and Crack Growth-Resistance (R-Curve) Behavior of Ceria-Partially-Stabilized Zirconia C.S. Yu;D.K. Shetty
  8. J. Am. Ceram. Soc. v.73 no.10 Crack Shielding in Ceria-Partially-Stabilized Zirconia D.B. Marshall
  9. J. Am. Ceram. Soc. v.75 no.11 Transformation Zone Shape Effects on Crack Shielding in Ceria-Partially-Stabilized Zirconia (Ce-TZP) Alumina Composites C.S. Yu;D.K. Shetty;M.C. Shaw;D.B. Marshall
  10. Scripta Metall. v.10 On the Formation of a Crack Tip Microcrack Zone A.G. Evans
  11. J Am. Ceram. Soc. v.67 no.4 Crack-Growth Resistance of Microcracking Brittle Materials A.G. Evans;K.T. Faber
  12. Acta Metall. v.35 no.11 Microcrack Toughening in Alumina/Zirconia M. Ruhle;A.G. Evans;R.M. McMeeking;P.G. Charalambides;J.W. Hutchinson
  13. J. Am. Ceram. Soc. v.74 no.12 In Situ Observation of Toughening Processes in Alumina Reinforced with Silicon Carbide Whiskers J. Rodel;E.R. Fuller, Jr.;B.R. Lawn
  14. J. Am. Ceram. Soc. v.73 no.3 Whisker Toughening: A Comparison between Aluminum Oxide and Silicon Nitride Toughened with Silicon Carbide G.H. Campbell;M. Ruhle;B.J. Dalgleish;A.G. Evans
  15. J. Am Ceram. Soc. v.71 no.12 Toughening Behavior in Whisker-Reinforced Ceramic Matrix Composites P.F. Becher;C.H. Hsueh;P. Angelini;T.N. Tiegs
  16. J. Am Ceram. Soc v.73 no.7 R-Curve Behavior in a Silicon Carbide Whisker/Alumina Matrix Composite J. Homeny;W.L. Vaughn
  17. J. Am. Ceram. Soc. v.73 no.1 Elevated-Temperature-Delayed Failure of Alumina Reinforced with 20 vol% Silicon Carbide Whiskers P.F. Becher;P. Angelini;W.H. Warwick;T.N. Tiegs
  18. J Mater. Sci. Eng v.12 Sub-Critical Crack Extension and Crack Resistance in Polycrystalline Alumina H. Hubner;W. Jillik
  19. J. Mater. Sci. Lett. v.1 no.8 Memory Effect of Crack Resistance during Slow Crack in Notched Al₂O₃ Bend Specimens R. Knehans;R. Steinbrech
  20. J. Am. Ceram. Soc v.70 no.4 Crack-Interface Grain Bridging as a Fracture Resistance Mechanism in Ceramics: Ⅰ Experimental Study on Alumina P.L. Swanson;C.J. Fairbanks;B.R. Lawn;Y.W. Mai;B.J Hokey
  21. Acta Metall Mater. v.38 no.6 R-Curve Behavior of Al₂O₃ Ceramics G. Vekinis;M.F. Ashby;P.W.R. Beaumont
  22. J. Am. Ceram Soc. v.73 no.11 In Situ Measurement of Bridged Crack Interfaces in the Scanning Electron Microscope J. Rodel;J.G. Kelly;B.R. Lawn
  23. J. Am Ceram. Soc v.75 no.6 Estimation of Crack Closure Stresses for In Situ Toughened Silicon Nitride with 8 wt% Scandia S.R. Choi;J.A. Salem;W.A. Sanders
  24. J Am. Ceram. Soc v.75 no.7 R-Curve Behavior and Strength for In-Situ Reinforced Silicon Nitrides with Different Microstructures C.-W. Li;D.-J Lee;S.-C. Lui
  25. J. Am Ceram. Soc. v.71 no.8 R-Curve Behavior of a Polycrystalline Graphite: Microcracking and Grain Bridging in the Wake Region M Sakai;J-I. Yoshimura;Y. Goto;M. Inagaki
  26. J. Am. Ceram. Soc. v.74 no.8 Crack-Tip Bridging Stress in Ceramic Materials X. Hu;E.H. Luts;M.V. Swain
  27. J. Am Ceram. Soc. v.75 no.4 Crack-Bridging Analysis for Alumina Ceramics under Monotonic and Cyclic Loading X. Hu;Y-W Mai
  28. J Am. Ceram. Soc v.70 no.4 Crack-Interface Grain Bridging as a Fracture Resistance Mechanism in Ceramics: Ⅱ. Theoretical Fracture Mechanics Model B.R. Lawn;Y.W. Mai
  29. Acta Metall Mater v.37 no.10 Role of Interfacial Grain-Bridging Sliding Friction in the Crack-Resistance and Strength Properties of Nontransforming Ceramics S.J. Bennison;B.R. Lawn
  30. Fracture v.1 The Fracture Toughness of Ceramics A G. Evans;A.H. Heuer;D.L. Porter
  31. Eng. Fract. Mech. v.20 no.3 Crack Growth in Cement-Based Composites R. Ballarini;S.P. Sah;L.M. Keer
  32. J Am Ceram Soc. v.73 no.7 R-Curve Behavior of Long Cracks in Alumina R.W. Steinbrech;A Reichl;W Schaarw chter
  33. J. Am Ceram. Soc v.76 no.7 Grain-Bridging Mechanisms in Monolithic Alumina and Spinel J.C. Hay;K.W. White
  34. J. Am Cerm. Soc. v.78 no.5 Analytical Modeling for Bridging Stress Function Involving Grain Size Distribution in a Polycrystalline Alumina K.-S. Sohn;S. Lee;S. Baik
  35. Fracture of Brittle Solids B.R. Lawn;T.R. Wilshaw
  36. J Am. Ceram. Soc v.77 no.2 Sigmoidal Indentation-Strength Characteristics of Polycrystalline Alumina R.F. Cook;E.G. Liniger;R.W. Steinbrech;F. Deuerler
  37. J. Am Ceram Soc. v.73 no.8 Role of Grain Size in the Strength and R-Curve Properties of Alumina P. Chantikul;S.J. Bennison;B.R. Lawn
  38. J. Mater. Res. v.2 no.3 Crack Resistance by Interfacial Bridging: Its Role in Determining Strength Characteristics R.F Cook;C.J. Fairbanks;B.R Lawn;Y.W. Mai